3M Spray Mount™ Spray Adhesive
Add to Favorites Print

3M Spray Mount™ Spray Adhesive

Item# gc0262

3M Spray Mount™ is a one-surface, clear adhesive with long-aging, quick tack, low soak-in, non-staining and non-wrinkling capabilities.  Spray Mount™ is repositionable but becomes permanent when dry.  If you are looking for a spray adhesive that will mount vellum, tissue and other delicate papers, then Spray Mount™ is perfect for you!

COMMONLY USED SURFACE-TO-SURFACE APPLICATIONS ARE:

  • Paper
  • Vellum
  • Tissue
  • Newsprint

DIRECTIONS & TIPS FOR USING 3M SPRAY MOUNT SPRAY ADHESIVE:

  1. Spray 6 to 8-inches away from object at a 90-degree angle in both directions for full coverage.  Don’t spray too fast.
  2. Once sprayed, let dry one minute or until tacky, then make bond.

SPECIAL TIPS:  Shake can well before use.  Make sure nozzle is pointed at object to be adhered.

TEMPERATURE RECOMMENDATIONS/LIMITATIONS:  Performs best when applied at room temperature.

CURE RATE & DRYING TIME:  5 minutes

GAP FILLING ABILITY:  Good. Adhesive will fill small gaps to create stronger bond.

CLEAN UP & REMOVAL RECOMMENDATIONS:  Use a solvent based cleaner.

CAUTION ADVISORIES OR SAFETY RECOMMENDATIONS:  Use in a well-ventilated area.  Do not store at temperatures above 120-degrees Fahrenheit.  Avoid skin and eye contact.

 
 
 
 
Get exclusive offers about this product and more!
 
 
Qty:
 
 
  • Non Toxic
  • Kid Friendly
  • Flammable
  • Waterproof
  • Dries Clear
  • Repositionable