Bead Landing Seascape Blue Tassel Seaglass Necklace
- Bead Landing™ Seascape Sea Glass Connector
- Bead Landing™ Chain
- Bead Landing™ Seascape Faceted Beads
- Bead Landing™ Seascape Lobster Claw Clasp
- Jump Rings
- Eye Pins
- Bent Nose Pliers
- Chain Cutters
Cut four 10" sections of Bead Landing™ chain.
Place an eye pin through 8 to 10 Bead Landing™ Seascape faceted beads. Fold the pin to a 90° angle and trim to ¼". Using a round nose pliers, begin rolling the pin over to form a loop.
Cut four lengths of chain with chain cutters. The chain length will be determined by how long you would like your necklace to hang.
Lay two lengths of chain side by side.
Lay the beaded eye pins in between the lengths of chain. Using round nose pliers, carefully open the loops on the beaded eye pins and close them around links in the chain. The beaded eye pins should lie perpendicular, between the chain lengths.
Repeat for the remaining two lengths of chain.
Remove the center top loop on the Bead Landing™ blue sea glass connector, with wire cutters.
Place a jump ring on each of the remaining loops on the Bead Landing™ blue sea glass connector.
Attach the chain with the blue faceted beads to each of the top loops on the connector.
Bring the ends of the beaded chain length together and join with a jump ring.
Repeat for the remaining beaded chain length.
On one of the bead lengths, place the Bead Landing™ Seascape lobster claw closure.
Add ¾" lengths of chain to the remaining loops at the bottom of the sea glass connector.