Bridesmaid Earrings and Necklace
- Rose Gold Elegance® Link Chain (70")
- Rose Gold Elegance® Open Jump Ring (37), 4mm
- Rose Gold Elegance® Head Pins (26), 25mm
- Rose Gold Elegance® Lobster Claw Clasp
- Rose Gold Elegance® Eye Pins (12), 25mm
- Rose Gold Elegance® Closed Jump Ring, 6mm
- Rose Gold Elegance® Cross Chandelier (3)
- Rose Gold Elegance® Earring Wire with Ball (2)
- Crystazzi® Cupcake Surprise Bicones (12)
- Crystazzi® Bicones (24) – Purple Passion
- Crystazzi® Satin Round (5), 8mm – Tanzanite
- Needle Nose Pliers
- Round Nose Pliers
- Wire Cutters
Step 1 Connect the earring wires to the top loops of the chandeliers.
Step 2 Make a Tanzanite Round link. Thread the bead onto an eye pin and form a wrapped loop. Be sure to attach the wire to the bottom loop of the chandelier before wrapping the loop closed.
Step 3 Make a 6mm Purple Bicone link using the wrapped loop technique. Attach a Bicone link to the round link from the previous step.
Step 4 Make the 4mm Pink Bicone drops. Thread the bead onto a ball head pin and form a wrapped loop. Attach the wire to the loop of the 6mm Purple bicone link before wrapping the loop closed.
Step 5 Repeat for the second earring.
Step 1 Cut six 7½" lengths of chain. Using 4mm jump rings, gather the chains into two groups of three. Gather each set of chain ends with a separate jump ring.
Step 2 Attach a lobster claw clasp end to one of the 4mm jump rings. Attach a second 4mm jump ring to the other set of grouped chain. The lobster claw clasp clips onto this jump ring.
Step 3 Make two of the following beaded link patterns. First link: 4mm Pink Bicone and a 6mm Purple Bicone. Second Link: 8mm Tanzanite Round. Third Link: 6mm Purple Bicone and a 4mm Pink Bicone. Connect the three links together and attach the first link to a chain jump ring from Step 1. Repeat for the matching pattern and the other chain jump ring.
Step 4 Cut six 1¼" lengths of chain. Using 4mm jump rings, gather the chains into two groups of three. Gather each set of chain ends with a separate jump ring.
Step 5 Using a 4mm jump ring, gather the chains from step 4 and the chandelier together.
Step 6 Make an 8mm Round link and a 6mm Bicone link. Attach them together and connect the round link to the chandelier using a 4mm jump ring.
Step 7 Cut eight random lengths of chain from 1¼" to 2". Use 4mm jump rings to gather the chains into two groups of four. Connect the chain groups to the bottom of the 6mm Bicone link from Step 6.
Step 8 Make eight 4mm Pink Bicone drops, eight 4mm Light Purple Bicone drops and eight 4mm Purple Bicone drops using wrapped loops. Randomly attach the drops to the chains using 4mm jump rings.