Step: 1

Necklace
Pass a head pin through a nugget and 15 crimp beads (don’t crimp them).

Step: 2

Make a basic loop at the top of the pin. Click to see technique for making loop.

Step: 3

Repeat steps 1-2 for five total dangles. (unit A)

Step: 4

Cut four 1-inch pieces of chain.

Step: 5

Attach a pinch bail to a pearl, then open the last link on a piece of chain and attach it to the pinch bail loop; repeat for each 1-inch piece of chain. (unit B)

Step: 6

Cut a 2-inch piece of Beadalon 7.

Step: 7

Crimp a crimp bead onto one end of the wire, then pass the wire through a closed crimp cover, chip, crimp cover and another crimp bead. Crimp the crimp bead to hold the beads in place.

Step: 8

Pass the top of the wire through a crimp bead, fold it and pass the end back through the crimp bead to form a small loop. Crimp it.

Step: 9

Repeat steps 6-8 for four total dangles. (unit C)

Step: 10

Cut two 6-inch lengths of chain.

Step: 11

Cut a 6-inch length of Beadalon 7 and use a crimp bead to attach one end to the end of a piece of chain.

Step: 12

Pass the wire through the following: pearl, A, pearl, B, chip, C. Repeat this pattern once more.

Step: 13

Pass the wire through the following: pearl, A, pearl, C, chip, B. Repeat this pattern once more.

Step: 14

Attach the wire end to the other piece of chain.

Step: 15

Use a jump ring to attach the clasp to one end of the necklace, then attach another jump ring to the other end of the necklace.

Step: 16

Earrings
Pass a head pin through a nugget and 15 crimp beads (don’t crimp them).

Step: 17

Make a basic loop at the top of the pin. Click to see technique for making loop.

Step: 18

Cut a 2-inch length of chain.

Step: 19

Attach a pinch bail to a pearl, then open the last link on a piece of chain and attach it to the pinch bail loop.

Step: 20

Cut a 2-inch piece of Beadalon 7.

Step: 21

Crimp a crimp bead onto one end of the wire, then pass the wire through a closed crimp cover, chip, crimp cover and another crimp bead. Crimp the crimp bead to hold the beads in place.

Step: 22

Pass the top of the wire through a crimp bead, fold it and pass the end back through the crimp bead to form a small loop. Crimp it.

Step: 23

Slide the top of each dangle onto the ear wire, then pinch the ear wire closed at the bottom.

Step: 24

Repeat all steps to make a matching earring.