Bubble Bowl Snowman
- Felt - Red (3), Gray (1), Black Glitter (4)
- Foam Glitter Sheet - Silver
- Chenille Stems - Brown (6)
- Large Pom Poms - Green (3)
- Small Pom Poms - Black (9)
- Glass Enamel Paint - White, Orange and Black
- Wood Dowel
- Wood Pipe Base
- Wiggle Eyes - Large (2)
- Low Heat Glue Gun
- Bubble BowlS - 8", 10" and 12"
Paint inside the bubble bowls white. Let dry.
Stack bowls, largest to smallest, and glue together with hot glue.
Cut strips of red felt for the scarf at 1-½" wide. Glue around the neck of the snowman.
Cut two 1-½"x 7" strips of red felt for the tail of the scarf and add little strips of gray felt for the stripes. Glue to the side of the scarf, a shown.
For the arms, twist three brown chenille stems together, leaving 2" for the twig fingers. Repeat for the second arm. Glue onto the sides of the body.
Glue wiggle eyes in place, paint on orange triangle nose and glue black pom poms for the smile.
Glue the dowel rod to the base to create pipe, as shown. Once dry, attach onto the side of the mouth using hot glue.
Take one sheet of black glitter felt and place the 8" bubble bowl, top down, onto the felt. Trace around the bowl to get an outline for the hat.
Once you get the outline of the opening of the bowl, add 1" to your outline to create the brim of the top hat. Cut out.
To create the top, take the remaining black glitter felt pieces and cut a 19"x4" strip. If the felt is not long enough, cut two 9-½"x4" strips and glue together.
Take 19" strip and glue onto the brim base to create the top half on the hat.
Use remaining black glitter felt and cut a circle for the top of the hat.
Cut a strip from the silver glitter foam measuring 19"x1". If the felt is not long enough, cut two 9-½"x1" strips and glue together.
Glue onto hat toward the base of hat to make the silver stripe.
Finally, top the snowman with his hat and glue down.