Chain Chandelier Earrings
Drops of chain and pearl create an elegant, flowing effect for these chandelier earrings.
Designed by Amy for Cousin
Material List
- Elegance® Cable Chain, 36" – Sterling
- Elegance® Star Cap (6), 6mm – Sterling
- Elegance® Cross Chandelier (2) – Sterling
- Elegance® Long Earring Wires (2) – Sterling
- Elegance® Open Jump Rings (12), 4mm – Sterling
- Elegance® Head Pins (6), 25mm – Sterling
- Crystazzi® Crystal Bicone (8), 4mm
- Crystazzi® Pearl (6), 6mm – White
- Needle Nose Pliers
- Wire Cutters
- Round Nose Pliers
Project Instructions
Thread a 4mm crystal bicone onto the long earring wire and form a wrapped loop. *Be sure to attach the loop to a chandelier before wrapping the loop closed. Repeat for the second earring.
Make the wrapped loop drops. Thread onto a head pin the following bead pattern: 6mm pearl, bead cap and a 4mm crystal bicone. Form a wrapped loop. Make three drops per earring.
Cut the following chain lengths: (4) 1-1/8", (8) 1-¼", (8) 1-3/8", (8) 1-½", (2) 1-5/8".
Group the chains into the following groups using 4mm jump rings, making two of each group. Group 1: 1-1/8", 1-¼", 1-3/8" and a 1-½" chain.
Group 2: 1-¼", 1-3/8", 1-½", 1-5/8", 1-½", 1-3/8” and a 1-¼" chain.
Group 3: 1-½", 1-3/8", 1-¼" and a 1-1/8" chain.
Use 4mm jump rings to connect the chain groups and wrapped loop drops to the chandeliers.
