Duck Tape® Polka Dot Clutch
Add to Favorites Print

Duck Tape® Polka Dot Clutch

With all the bright and colorful Duck Tape colors available, the sky’s the limit to your creative possibilities!
Designed by Michaels® Design Team
Craft Time: 60+ minutes
Uses Recycled Items: No
Get exclusive offers about this product and more!

Material List

  • Duck Tape®: Black, Aqua, Purple
  • Velcro Circles, adhesive-backed (2 sets)
  • Rhinestones, adhesive-backed
  • Circle Stencil
  • X-Acto® Knife
  • Scissors
  • Cutting Board
  • Ruler
  • Pencil

Project Instructions

Step: 1

Tear strips of black tape about 12-inches long. On wax paper lay down first strip of tape, lay second strip overlapping first strip ¼-inch. Continue until there is about a 12-inch by 18-inch sheet. Repeat to cover sheet with another layer of black tape, sticky sides together. Trim to make edges even.

Step: 2

Place strips of aqua tape along the edges of the black tape sheet, trimming as you go along.

Step: 3

Use the circle stencil to cut circles from purple tape and place them in rows on the black tape sheet.

Step: 4

For bow, fold a 5-inch long piece of aqua tape lengthwise with sticky sides together; trim ends with scissors. Fold the edges to the middle of the tape and secure with a piece of 1-inch wide aqua tape. Tear off a small piece of tape and roll it so that it’s sticky all over; use to attach the bow to the clutch as shown.

Step: 5

Fold the black sheet into thirds and attach sides together with dots of tape on the inside. Stick two pieces of Velcro to the inside of the flap and stick their corresponding pieces to the outside for closure.

Step: 6

Add rhinestones along aqua trim and to the bow as desired.


Use photo as a guide and follow manufacturer’s instructions for all products used.