Elmer's China and Glass Cement creates a clear, non-toxic bond for glass, ceramics, pottery and china that is also dishwasher-safe. Sets in one minute, making multi-piece repairs easier, and reaches full strength in two-three days.

DIRECTIONS & TIPS FOR USING THIS PRODUCT:
Surfaces must be clean, dry, free of oil, soap, wax, paint, varnish, previously used cement and any other residue.

SPECIAL TIPS:
Work in at least 60 degree F. Gently shake tube. Slowly squeeze adhesive onto one surface only and position pieces together. When alighted, press together for 15-60 seconds (depending on the material).

CURE RATE & DRYING TIME:
Sets in 1 minute. Cures in up to 48 hours (depending on the material).

TEMPERATURE RECOMMENDATIONS/LIMITATIONS:
Work in at least 60 degrees F. Mended pieces will not withstand high oven heat.

CLEAN UP & REMOVAL RECOMMENDATIONS:
Wipe of excess with clean cloth while cement is still wet.

CAUTION ADVISORIES OR SAFETY RECOMMENDATIONS:
INGESTION: If accidentally swallowed, dilute by drinking large quantities of water. Immediately contact poison control center or hospital emergency room for any other treatment directions.
SKIN: In case of irritation, flush with water.
EYES: Immediately flush eyes with plenty of water. Call a physician if irritation persists.