Elmer's Carpenter's Exterior Wood Glue
Elmer's Carpenter's Exterior Wood Glue is a weather resistant glue for exterior woodworking projects and repairs. This 4-ounce bottle of glue contains real wood for better finishing and staining results, plus a mildewcide for better outdoor protection.
COMMONLY USED SURFACE-TO-SURFACE APPLICATIONS ARE:
DIRECTIONS & TIPS FOR USING ELMER'S CARPENTER'S EXTERIOR WOOD GLUE:
- Spread glue liberally on both surfaces for firm bond. Clamp together for one hour or more. Remove excess wet glue with a clean, dry cloth. For firmest bond, let dry overnight.
- Sand glue line with medium sandpaper before staining. Wood and dried glue may stain differently. Test on scrap wood for color match before gluing. Apply paint or stain after 24 hours.
SPECIAL TIPS: Surface must be clean, dry, and free of oil, grease, and old glue. Parts should fit snugly. Glue to bare wood only. Close bottle after use.
TEMPERATURE RECOMMENDATIONS/LIMITATIONS: Work in temperatures above 60 degrees F.
CURE RATE & DRYING TIME: Set time: 60 minutes. For firmest bond, let dry overnight.
CLEAN UP & REMOVAL RECOMMENDATIONS: Use soap & water when glue is wet; scrape and sand when glue is dry.
CAUTION ADVISORIES OR SAFETY RECOMMENDATIONS: Elmer's Carpenter's Exterior Wood Glue is non-toxic.
- Non Toxic
- Kid Friendly
- Dries Clear