Eyelet & Snap Fastener Pliers
Add to Favorites Print

Eyelet & Snap Fastener Pliers

Item# nw0935

An essential tool for applying snaps and eyelets.

Instructions:

Test on a swatch of fabric. Use 2 layers of light to medium-weight fabric, reinforced with interfacing.

Snap Fasteners Application:

1. Lift plastic platform and turn until yellow plastic holder snaps into place.

2. Stretch rubber rings around plastic and metal holders.

3. Mark position of snaps on topside and underside of garment.

For Sockets

1. Insert ring prong into plastic holder with points exposed.

2. Insert socket into metal holder with raised center exposed.

3. Position garment in pliers with ring prong on outside of garment.

4. Squeeze pliers firmly. Check for tightness; squeeze again, if necessary.

For Stud

1. Insert ring prong into metal holder with points exposed.

2. Insert stud into plastic holder ball side down.

3. Position garment in pliers with ring prong on underside of garment.

4. Squeeze pliers firmly.

Eyelet Application:

1. Mark position of eyelets on outside of garment.

2. Lift plastic platform and turn until punch snaps into place.

3. Remove rubber rings.

4. Position garment in pliers and punch hole in fabric.

5. Place eyelet on punch saucer side down.

6. Position garment in pliers with eyelet going through the hole from right side of fabric.

7. Squeeze pliers firmly.

 
 
 
 
Get exclusive offers about this product and more!
 
 
Qty: