Falling Leaves Stepping Stone
Designed by Dan Daniels for Diamond Tech®
- Pre-made Hexagon Stepping Stone, 12-inch
- Stained Glass Chips, Purple
- Stained Glass Chips, Orange
- Stained Glass Chips, Dark Green
- Stained Glass Chips, Red
- Stained Glass Chips, Yellow
- Sanded Grout, White, 16 ounces
- Measuring Cup
- Mixing Bowl and Spoon
- Paper Towel
Using tracing paper, transfer leaf pattern directly onto stone.
Nip red, orange, yellow, dark green and purple chips into random sizes and fill in the leaf pattern. Nip dark green chips into thin rectangles.
Nip dark green and purple chips into triangles and place alternating colors along the border, 1/8-inch apart and 1-inch from the edge to allow room for the cement. Nip as needed at border corners.
Place small amount of adhesive on back of the stained glass chip and place on stepping stone. Press into position. Leave about 1/8-inch between stained glass chips.
Following package directions, mix grout with water. Press grout into position between gaps in glass. Let set for 10 minutes; remove excess grout with damp sponge.
When grout is thoroughly dry, polish surface with soft cloth.
Use protective eye wear when nipping glass. Never dispose of grout directly down a drain.