Fancy Feathered Tee
Add to Favorites Print

Fancy Feathered Tee

Get fancy with Tulip® One-Step Fashion Dye™! Splash on purple for vibrant color, then add Tulip® 3D Fashion Paint™ to take your creation to new dimensions. Designed by Allee Marderosian, courtesy of
Craft Time: 60+ minutes
Get exclusive offers about this product and more!

Material List

  • Tulip® One-Step Fashion Dyes™- Purple
  • Tulip® 3D Fashion Paint™- Black Slick, White Slick and Silver Metallic
  • Tulip® Fashion Form™
  • T-Shirt - Beige
  • Paper Towels
  • Plastic Tablecloth
  • Paper
  • Pencil

Project Instructions

Step: 1

Prewash T-shirt to remove sizing. Do not use fabric softener.

Step: 2

Cover work surface with plastic tablecloth. Lay damp shirt on prepared surface.

Step: 3

Wearing plastic gloves, add water to Purple dye bottle to line indicated on bottle. Replace cap tightly. Shake until dye is dissolved.

Step: 4

Apply dye in the middle section of the shirt from top to bottom. Refer to photo.

Step: 5

Cover T-shirt with plastic tablecloth and let sit 4 to 6 hours. Wash in a large load of water with a small amount of laundry soap and dry in dryer.

Step: 6

Once top is dry lay out flat on clean surface. Insert Fashion Form™ in between layers of shirt. Start flow of Black Slick 3D Fashion Paint™ on a paper towel, applying an even pressure on bottle for a smooth line. Use Black Slick to freehand draw a feather from just under neckline down to bottom of shirt. Refer to photo. Let dry.

Step: 7

Use White Slick to draw two smaller feathers randomly on top of black feather. Let dry.

Step: 8

Use a pencil and paper to create your own funky design. Once design is to liking, trace over design with Silver Metallic 3D Fashion Paint™, flip it over onto the left side of shirt and press very gently. Repeat step with Silver and Black until desired amount of designs are on the left side of tee. Let dry.


For raised line work, hold bottle at an angle to fabric; for flat line work, hold bottle straight up and down.