Flat Disc Bead Wire Ring
Simple wire and a flat disc bead combine to form a ring that will make a statement.
Designed by Wyatt White
- Beadalon® 7 Strand .018” Silver Color Stringing Wire
- #4 Crimp Tube Silver Plate
- Creativity Inc. Flat Disc Bead
- Chain Nose Pliers
- Wire Cutters
Cut one strand of stringing wire approximately 14" in length.
Pass the wire through the bead and center the bead on the wire.
Pass one end of the wire through a crimp tube. Then pass the other end of the wire through in the opposite direction.
Using one end of the wire, pass back through the bead and again through the crimp tube. This will create a double strand of wire through the bead and the crimp tube.
Using both ends of the wire make a circle and pass the ends back through the crimp tube, repeat this step until you have a four strand loop (the ring) in the correct size for your finger.
Adjust the loops so that they are all even, once all the wires are even and correctly sized. Use chain nose pliers to mash the crimp tube, making sure the top bead is tight and the loop or ring is correct.