Lay out your design before assembling to make assembly easier.
Designed by Michelle Perez.
- Create your Style with Swarovski Elements™ Bicone, 6mm – Sapphire (21), Capri Blue (63) and Metallic Blue (21)
- Create your Style with Swarovski Elements™ Rondelles, 5mm – Clear Crystal (5)
- Lobster Closure
- Jump Ring, 6mm (28)
- Jump Ring, 4mm
- Elongated Cable Chain, 18"
- Fringe Chain, Varied Lengths, About 3" (18)
- Head Pins (21)
- Eye Pins (63)
- Chain Nose Pliers
- Round Nose Pliers
- Flush Cutters
Use your head pins to make all of your bottom dangles. String a metallic blue bicone onto a head pin, then trim to ¼". Bend pin close to crystal and make a loop with needle nose pliers. Make 21 dangles.
Use your eye pins to make your connector links. Make 21 with only Capri Blue bicones. Make 21 with four Sapphire bicones. Add a rondelle onto five of those. Make 21 with three 4mm Metallic Blue bicones.
Attach the dangles and links together as shown in the picture.
Use a jump ring to connect three pieces of chain fringe together.
Working from the center, attach a dangle to the necklace with a 6mm jump ring.
Attach another dangle, skipping a link up the chain. Attach one unit of fringe.
Repeat this pattern until you have attached a total of three groups of dangles and two fringe chain units.
Repeat last two steps for the other side of necklace.
Attach Lobster closure to one chain end with a 4mm jump ring. Attach a 6mm jump ring to the other end.