Glam Slam Necklace
Add to Favorites Print

Glam Slam Necklace

Designed by Mykeall Shepherd.
Craft Time: varies
Uses Recycled Items: No
 
 
 
 
Get exclusive offers about this product and more!
 
 

Material List

  • Bead Landing™ Color Pop™ Charms – Hot Pink Color Pop™ Spikes – Rhinestud
  • Color Pop™ Chain Charm – Silver/Black
  • Bead Gallery® Sophisticate Chic Metallic Sliders
  • Bead Landing™ Metallic Chain
  • Bead Landing™ Metallic Clasp
  • Bead Landing™ Jump Rings – Silver
  • Bead Landing™ Eye Pins – Silver
  • Round Nose Pliers
  • Chain Nose Pliers
 

Project Instructions

Step 1 Gather a Sophisticate Chic metallic slider, a Color Pop™ Hot Pink charm and four jump rings. Open one of the jump rings and slide it on the charm. Attach the jump ring to one of the loops on the back of the slider. Attach another jump ring to the loop directly beside the other one. Attach the remaining two jump rings on each of the two remaining loops on the back of the slider.

Step 2 Repeat Step 1.

Step 3 Gather the third Sophisticate Chic metallic slider and the Color Pop™ Silver/Black chain charm. Open the jump ring on the charm wide enough to fit both openings through the two loops on the back of the slider. Using the round nose pliers, close jump ring around loops so that the charm is adhered to the slider and will dangle as pictured.

Step 4 Gather a Color Pop™ Rhinestud Spike and a jump ring. Open the jump ring, slide on the spike. Slide the jump ring on one of the loops where the charm is attached from Step 4 and close jump ring.

Step 5 Repeat Step 4 on the other loop where the charm was attached from Step 3.

Step 6 Gather two jump rings and attach one on each open loop of the Sophisticate Chic metallic slider from Step 3.

Step 7 Gather the three sliders from Steps 1, 2, and 6. Lay the slider from Step 6 in the middle, the slider and charm from Step 1 to the left, and the last slider from Step 2 to the right. Attach the empty jump rings from the top of the middle slider to the empty jump rings directly beside the charms. See picture for reference. All three sliders should be connected.

Step 8 Gather the Bead Landing™ chain and measure four strands to the desired length.

Step 9 Gather the connected sliders from Step 7 and a strand of the Bead Landing™ chain. Attach the chain to one of the open jump rings at the top of the left and right sliders. Repeat this step with the remaining three pieces of Bead Landing™ chain and open jump rings. See picture for reference.

Step 10 Connect the two strands of chain that are on the same side with a jump ring.

Step 11 Repeat Step 10 with the remaining two strands on the other side of the necklace. Add the Bead Landing™ metallic clasp to this jump ring.

Step 12 Close the necklace by attaching the clasp to the jump ring on the remaining side.