Gorilla™ Super Glue
Add to Favorites Print

Gorilla™ Super Glue

Item# gc1662

Gorilla Super Glue provides a strong, instant bond with our Impact-Tough® formula - tiny rubber particles within the adhesive that provides a less brittle bond and allows for high impact resistance. The thicker formula allows for easy flow control, while the metal tip prevents clogging.  Gorilla Super Glue bonds a wide range of similar and dissimilar materials including most plastics, metals, elastomers, wood and other porous surfaces.  Gorilla Super Glue is ideal for smaller repairs that require an instant bond and for projects where clamping is not needed.

COMMONLY USED SURFACE-TO-SURFACE APPLICATIONS ARE:
Repairing ceramics
Metal
Wood
Most plastics
Rubber & latex

DIRECTIONS & TIPS FOR USING THIS PRODUCT:
All surfaces must be clean and tight fitting. Apply a small amount of Gorilla Super Glue (recommend 1 drop per square inch). Do not over apply Gorilla Super Glue. Hold items together for approximately 30-60 seconds (handling time varies depending on items glued).

SPECIAL TIPS:
Storage: After each use, clean nozzle, replace cap securely and store in a cool, dry place.

CURE RATE & DRYING TIME:
Open working time: not repositionable; Clamp Time: 30-60 seconds, Drying Time: light handling after 1-5 minutes and 100% cured in 24 hours

TEMPERATURE RECOMMENDATIONS/LIMITATIONS:
Performs best when applied in room temperatures. Once cured, will withstand freezing temperatures as low as -65 degrees F and hot temperatures up to 200 degrees F, although too much exposure to extreme heat will cause the strength of the bond to be compromised.

GAP FILLING ABILITY:
Not recommended for filling gaps.

CLEAN UP & REMOVAL RECOMMENDATIONS:
Uncured: Use a towel dampened with the acetone or isopropyl alcohol to wipe on area, applying force to remove the uncured glue. Several applications may be necessary to completely remove the uncured glue. Cured/hardened: Use a towel dampened with acetone or isopropyl alcohol and wipe the surface, allowing cloth to remain on the surface for approximately 30 seconds after wiping. Then, using moderate pressure, rub the surface. The adhesive should begin to soften, but many applications may be necessary.

CAUTION ADVISORIES OR SAFETY RECOMMENDATIONS:
Bonds skin instantly. Eye irritant. Combustible.  Rapid polymerization may occur upon contact with water or alkaline substances, generating heat. Use in well-ventilated area. Keep out of reach of children and animals.

 

 < /p>

 
 
 
 
Get exclusive offers about this product and more!
 
 
Qty:
 
 
  • Non Toxic
  • Kid Friendly
  • Flammable
  • Waterproof
  • Dries Clear
  • Repositionable