Gorilla Glue is the leading multi-purpose 100% waterproof glue. Incredibly strong and versatile use Gorilla Glue for your toughest repairs, both inside and out. Great for bonding dissimilar surfaces, Gorilla Glue provides a permanent bond that is sandable, stainable and paintable once cured. Comes in convenient 2 oz or 4 oz bottles.

COMMONLY USED SURFACE-TO-SURFACE APPLICATIONS ARE:

• Wood

• Metal

• Glass

• Stone

• Foam

• Repairing ceramics

DIRECTIONS & TIPS FOR USING THIS PRODUCT:
All surfaces must be clean and tight fitting. Follow the 3-step directions: Damp it (lightly dampen one surface with water). Glue it (spread a thin layer onto other surface). Clamp it (clamp objects together for 1-2 hours). After clamping, Gorilla Glue will expand 3-4 times, so be careful of squeeze-out on finished projects. Do not over apply Gorilla Glue.

SPECIAL TIPS:
Storage: After each use, wipe lid and nozzle clean with a dry cloth. Squeeze excess air from bottle and tightly replace lid.

CURE RATE & DRYING TIME:
Open working time: 10-15 minutes; Clamp Time: 1-2 hours, Drying Time: 80% in 1-2 hours and 100% cured in 24 hours.

TEMPERATURE RECOMMENDATIONS/LIMITATIONS:
Performs best when applied in room temperature, but can be applied in temperatures above 40 degrees F. Once cured, will withstand freezing temperatures as low as -40 degrees F and hot temperatures up to 212 degrees F.

GAP FILLING ABILITY:
Not recommended for filling gaps.

CLEAN UP & REMOVAL RECOMMENDATIONS:
While still wet, Gorilla Glue can be removed with a dry rag and mineral spirits or paint thinner. Once dried, Gorilla Glue is permanent so the only way to remove it would be to sand, chip, scrape, etc.

CAUTION ADVISORIES OR SAFETY RECOMMENDATIONS:
Keep out of reach of children and animals. Harmful or fatal if swallowed. Do not microwave or heat. Do not leave in hot vehicle. Wear gloves to avoid skin contact. Gorilla Glue will stain skin and ruin clothes.