Haunted Halloween Layout
Add to Favorites Print

Haunted Halloween Layout

Make your All Hallow’s Eve memories even spookier with this Haunted Halloween Scrapbook Page! Aleene’s® Acid-Free Tacky Glue™ holds embellishments perfectly in place; add extra ghoulish garnish with Tulip® 3D Fashion Paint™. Designed by Suzie Shinseki, courtesy of iLoveToCreate, a Duncan Enterprises Company
Craft Time: 60+ minutes
 
 
 
 
Get exclusive offers about this product and more!
 
 

Material List

  • Tulip® 3D Fashion Paint™- Black Slick. True Red Slick and Gold Metallics
  • Aleene’s® Acid-Free Tacky Glue™
  • Scrapbook Papers- Black, Tootsie, African Daisy, Wild Pansy, Wild Pansy, Holiday Sprinkles
  • Bazzill Basics Paper- Dark Olive
  • Pop Dots
  • Cheesecloth
  • Easy Felt- White
  • Photos
  • Paper Cutter
  • Scissors
  • Circle Template
  • Black String
  • Craft Knife
  • Pen - Black
  • Pencil
 

Project Instructions

Step: 1

Cut six 2” circles from Orange paper using circle template and pencil. Cut 3 circles of same size from Yellow paper.


Step: 2

Lightly sketch jack-o-lantern faces on three of the orange circles. Cut out with craft knife.


Step: 3

Use Aleene’s® Acid-Free Tacky Glue™ to glue the jack-o-lantern faces onto the yellow circles. Turn over (yellow side up) and place jack-o-lanterns vertically about 1” apart. Lay black string over the backs of jack-o-lanterns in the center, with about 2½” extra string at the top.


Step: 4

Apply glue to one side of remaining orange circles and glue on top of yellow circle, sandwiching string in between. (The pumpkins will dangle from top of page.)


Step: 5

Cut out photos and glue on backs of jack-o-lantern faces. Use black pen to draw spider web designs around photos if desired. Glue string on back of page so jack-o-lanterns dangle from the top left edge. Let dry.


Step: 6

STAIRS:


Step: 7

Using pattern, cut out purple stairs; cut strips of a different colored paper slightly longer than stairs on each side and glue to top of steps. Refer to photo. Let dry.


Step: 8

DOOR:


Step: 9

Cut a 5” x 7” piece from the green “Holiday Sprinkles” paper. Position in center of page, leaving approximately 3½” at bottom for placing stairs. Cut a 4” x 6½” piece from the orange paper and score ¼” in from left edge to allow door to open. Glue onto green section, aligning bottom edges. Let dry.


Step: 10

Cut a 3½” x 6½” piece from yellow paper. Open door and glue yellow paper inside. Let dry. Cut out and glue your “scariest” Halloween photo onto yellow paper and “frame” with black paper if desired. Use black pen to write “welcome” or word of choice onto yellow paper in scary font, then cut out in the shape of a dialogue box and glue next to photo. Let dry.


Step: 11

Cut a 3” x 3½” section from green paper and glue onto bottom of orange door, aligning bottom and right edges. Cut orange strips for bottom portion of door and glue. Refer to photo.


Step: 12

Cut out cat pattern and trace around on black cardstock. Cut out and glue to bottom of door.


Step: 13

Trace around outer door window (see pattern) on black cardstock, then cut out and glue to top portion of door. Cut out smaller shape in yellow and use True Red Slick Tulip® 3D Fashion Paint™ to write “ENTER if you DARE” in spooky font. Let dry then glue in center of black frame on top of door.


Step: 14

Use Gold Metallic 3D Fashion Paint™ to create two hinges on left side of door and door handle on right side next to window. Let dry.


Step: 15

WINDOW:


Step: 16

Cut out window pattern and trace on purple paper, making two. Use craft knife to cut around top, bottom and right side of window portion as in pattern, leaving left side attached. Score down left side, bending back to make window open like a shutter.


Step: 17

Trace around same pattern on yellow paper and cut out. Cut out and glue Halloween photos onto the yellow window section. Glue purple windows over the tops of yellow sections with photos, showing pictures through the shutter opening. Glue onto upper right side of page.


Step: 18

Create window lines on outside of shutter with Black Slick. Let dry.


Step: 19

STAIRS:


Step: 20

Center the first step directly under the bottom of door and glue. Stick three Pop Dots to back of second step (one on each end and one in center) and position below the first stair to make it dimensional. For the third stair, stack two Pop Dots (sides and center) and position below second stair.


Step: 21

Cut two ¾” x 3½” strips from the green paper for stair posts and two thinner strips for the banisters. Refer to photo for placement and glue in place.


Step: 22

Cut a 1¼” circle from yellow paper using circle template. Glue on right side next to top window. Trace and cut out bat. Glue on top of moon.


Step: 23

GHOSTS:


Step: 24

Cut pieces of cheesecloth to create ghosts. Glue one coming from behind right side of door and a second next to jack-o-lanterns. Dot eyes and mouth with Black Slick. Let dry. Add small pieces next to stairs for spider webs.


Step: 25

Cut out skulls from stiff white felt pattern and add features with Black Slick. Let dry. Glue skulls on top of stair posts.


Step: 26

Embellish door, windows, etc. as desired.


Tips

Use Easy Felt to create skull embellishments or use any spooky Halloween icons as desired to decorate page.