I Heart Canada Tee
- Tulip® Fashion Glitter™ – Apple Red Jewel
- Tulip® Fashion Glitter Bond™
- Tulip® Fashion Form™
- Tulip® 3D Fashion Paint™ – Deep Red
- T-shirt – White
- Self-adhesive Shelf Paper
- Permanent Felt Pen
- Paper Towels
- Wedge Cosmetic Sponge
- Colored Chalk Sharpened to a Point
- Scratch Paper
Wash shirt without fabric softener, dry in dryer then iron smooth. Insert Fashion Form into shirt to prevent seepage.
Place a piece of shelf paper, shiny side up, over leaf pattern. Use felt pen to trace pattern onto paper. To create stencil, carefully cut out center of design leaving outer edges intact. Cut out heart and set aside.
Peel paper backing from stencil and position on front of shirt where desired. Peel backing from heart and position inside design. Firmly press with fingers along inside cut edges to prevent seepage.
Squeeze a puddle of Glitter Bond onto foil. Dip flat end of wedge sponge into glue then coats within stencil applying an even coat. Immediately pour Red Glitter over adhesive. Shake off excess glitter onto scratch paper to be reused.
Carefully remove stencil and inner heart. Let dry.
Flip over word pattern then lightly trace along lines with chalk. Position word, chalk side down, where shown. Hold in place with hand then use a finger to trace and press along pattern lines, transferring chalk to fabric. Remove pattern.
Test flow of Deep Red on paper towel using an even pressure on bottle for a smooth line. Follow lines with paint. Let thoroughly dry then brush off any chalk that may still show. Let dry.