Industrial Chic™ Red Anchor Necklace
Add to Favorites Print

Industrial Chic™ Red Anchor Necklace

Designed by Mary Feliciano for Horizon Group USA
Craft Time: 30 minutes
Uses Recycled Items: No
 
 
 
 
Get exclusive offers about this product and more!
 
 
 Industrial Chic™ Findings, small

Industrial Chic™ Findings

 Industrial Chic™ Pendants, small

Industrial Chic™ Pendants

 Industrial Chic™ Spacers, small

Industrial Chic™ Spacers

 

Material List

  • Industrial Chic Spacers: MKP18133-123 (In instructions referred to as spacer 1)
  • Industrial Chic Gold Spacers: MKP18126-05 (In instructions referred to as spacer 2)
  • Industrial Chic Red Spacers: MKP18124-123 (In instructions referred to as spacer 3)
  • Industrial Chic Spacers: MKP19555-01 (In instructions referred to as spacer 4)
  • Industrial Chic Gold mini spacers: MKP18123-123 (In instructions referred to as spacer 5)
  • Industrial Chic Findings Mix : MKP18108-123
  • Industrial Chic Pendant: MKP19538-30
  • Industrial Chic Pendant: MKP19535-01
  • Industrial Chic (12) Handcrafted Glass Assortment BB10265-123 (49pcs)
  • Industrial Chic (18 inches) 3mm Leather with Clasp MKP18139-10
  • Jewelry Essentials Tools Side Cutters JC11962-11
  • Jewelry Essentials Tools Round Nose Pliers JC11966-30
  • Jewelry Essentials Tools Chain Nose Pliers JC11967-30
  • Glue: E-6000 Adhesive
 

Project Instructions

4-inches from the left end of your cord tie a knot.

Thread the following spacers through the cord: (1) spacer 1, (1) spacer 2, (1) spacer 3, (1) spacer 2, (1) spacer 1, (1) spacer 2, (1) spacer 3, (1) spacer 2, (1) spacer 1, (1) spacer 2.

Thread pendant MKP19535-01 onto the cord.

Continue Threading spacers: (1) spacer 2, (1) spacer 1, (1) spacer 2, (1) spacer 3, (1) spacer 2, (1) spacer 1, (1) spacer 2, (1) spacer 3, (1) spacer 2 and (1) spacer 1.

Tie a knot close to the final spacer on the right side of your cord.

Attach pendant MKP19538-30 to pendant MKP19535-01.

Red bead Pendant #1: take a head pin and thread 6 red beads from the bead bucket in ascending order. The beads should form a cone. (Put aside).

Red Bead Pendant #2: repeat Step 7 but add spacer MKP19555-01 and spacer MKP18123-123 to the final (largest) spacer on the pin.

Attach Red Bead Pendant #2 from Step 8 to the wire part of pendant MKP19538-30.

Take an eye pin and thread 8 spacers: (1) spacer 4, (1) spacer 5, –in alternating order. Using your round nose pliers, attach the link below red bead pendant #2.

Take a second eye pin and thread; (1) spacer 4, (1) spacer 5, (1) spacer 4, (1) spacer 5, Bead Pendant #1, (1) spacer 4, (1) spacer 5, (1) spacer 4 and (1) spacer 5.

Using your round nose pliers, attach your eye-pin to pendant MKP19535-01.

Make sure that your end cords are even –if they are not, trim the longer end. Step 14: Using a strong glue, glue your end caps to the ends of your cord.

Related Projects