Metallicity Necklace
Add to Favorites Print

Metallicity Necklace

Designed by Denise Yezbak Moore.
Uses Recycled Items: No
 
 
 
 
Get exclusive offers about this product and more!
 
 

Material List

  • 4 Gold/Silver Swirl square & circle sliders *Swirl Slider*
  • 4 Antique silver tone conch slider *Conch Slider*
  • 3 Gold tone black and crystal sliders *Gold Slider*
  • *Oval Crystal Slider*
  • 8 feet - Gunmetal tone 5.5mm elongated chain
  • 30 Gunmetal tone 6mm jump ring
  • 1 Gunmetal tone lobster clasp
  • Tools:
  • Flush Cutters
  • 2 – Chain Nose Pliers
 

Project Instructions

Step 1 Connect one 6mm jump ring to end of 15 ½” chain. On the other side of chain connect a lobster clasp using 6mm jump ring.

Step 2 Open link on each end of connecting chain in steps 3-11.

Step 3 Count down 14 links from the right side of 15 ½” chain and connect 11 ½” of chain. Repeat on left side.

Step 4 Count down 4 links from the right side of 11 ½” chain and connect 9 ½” of chain. Repeat on left side.

Step 5 Count down 4 links from the right side of 9 ½” chain and connect 9” of chain. Repeat on left side.

Step 6 Count down 4 links from the right side of 9” chain and connect 8” of chain. Repeat on left side.

Step 7 Count down 4 links from the right side of 8” chain and connect 7” of chain. Repeat on left side.

Step 8 Count down 4 links from the right side of 7” chain and connect 6 ¼” of chain. Repeat on left side.

Step 9 Count down 4 links from the right side of 6 ¼” chain and connect 5 ¼” of chain. Repeat on left side.

Step 10 Count down 4 links from the right side of 5 ¼” chain and connect 4 ½” of chain. Repeat on left side.

Step 11 Count down 4 links from the right side of 4 ½” chain and connect 3 ½” of chain. Repeat on left side.

Step 12 Count down 4 links from the right side of 3 ½” chain and connect 2 ½” of chain. Repeat on left side.

Step 13 Using left over chain, open links and connect the strands of chain together to form a solid base. This can take up to 75 links.

Step 14 Using four 6mm jump rings, connect conch slider to top left side, top right side, top center, and bottom center of base chain.

Step 15 Using four 6mm jump rings, connect swirl sliders below conch slider on left side, right side, left of center and right of center.

Step 16 Using four 6mm jump rings, connect gold slider to the right and left side of center top conch slider.

Step 17 Using two 6mm jump rings, connect oval crystal slider to bottom center of necklace.