Mica Shift Cuff Bracelet
Add to Favorites Print

Mica Shift Cuff Bracelet

Create this pretty cuff bracelet with a Mica Shift Technique and Premo! Sculpey® Polymer Clay.

Designed by Jennifer Bezingue, courtesy of Polyform.


Craft Time: 60+ minutes
Uses Recycled Items: No
Get exclusive offers about this product and more!

Material List

  • Premo! Sculpey® Accents, 2oz.: Bright Green Pearl (2), Peacock Pearl (1), Magenta Pearl (1) and Purple Pearl (1)
  • Sculpey® Clay Tool Starter Set
  • Sculpey® Texture Makers or Other Texture Tools
  • Clay Pasta Machine
  • Acrylic ROller
  • Clay Cutters, Round
  • Metal Cuff Bracelet Form
  • Sandpaper: 320, 400 and 600 grit
  • Buffing Machine Fitted with Loose Muslin Wheel
  • Safety Glasses

Project Instructions

Preheat oven to 275°F. Test temperature with oven thermometer for perfectly cured clay. Condition all clay by kneading until it's soft and smooth or running it through the pasta machine for several passes on the widest setting. Fold the clay in half after each pass and insert the fold side into the rollers first.

Try on cuff bracelet and squeeze to fit your wrist. Remove and squeeze a little bit more. You will build up the clay on the outside of the cuff bracelet and remove after baking, so you can use the same cuff over and over.

At thickest pasta machine setting, make two Bright Green Pearl clay sheets slightly larger than the cuff bracelet. Using mica shift technique, make pattern on one sheet.

Mica Shift Technique: (Courtesy of Pier Volkus and Mike Bessler)

  • After rolling through thickest past machine setting, choose a Texture Maker and lightly mist it with water.  Remove the Texture Maker and use a paper towel to remove any excess water.
  • Using the flexible blade of the Super Slicer, parallel to the surface of the clay, remove the top layer of the clay.  The design will be in the clay, but the clay surface will be totally flat.
  • Put the sheet of clay through the next widest setting of the Clay Conditioning Machine.

Lay patterned sheet over plain sheet and roll together with Acrylic Roller, taking care not to trap air between layers. Lay patterned sheet on outside of cuff bracelet, PATTERNED SIDE IN. Press firmly, taking care not to trap air bubbles between the clay and the bracelet. Trim edges even with bracelet.

Make Peacock Pearl sheet that is slightly larger than cuff bracelet. Set aside on deli paper. Make Magenta, Bright Green and Purple Pearl sheets at thickest clay machine setting and layer on top of thinner sheet of the same color. Make mica shift patterned sheets and roll through pasta machine. Using round cutter, cut a hole in the Peacock sheet, cut a same-size piece from a mica shift sheet, and insert the cutout into the hole on the Peacock sheet. Repeat with different sizes of cutters and clay colors. When Peacock sheet is finished, cover with deli paper and burnish flat with tool. Lay sheet on outside of cuff bracelet, PATTERNED SIDE OUT. Press sheet firmly, taking care not to trap air between layers. Trim edges and smooth.

Bake according to directions above. When bracelet has cooled enough to handle, remove from metal cuff form. Wet-sand with 320, 400 and 600 grit sandpaper. Put on safety glasses and buff bracelet on buffing machine.


Using different textures creates different effects on this bracelet. For maximum design impact, overlap the cutouts and allow some to extend past the edges. Firm clay works better for mica shift techniques. If your clay is very soft, roll it to a #4 setting on the pasta machine and press it between two pieces of white paper for 15 minutes.