Paper Cube Snowman
Add to Favorites Print

Paper Cube Snowman

Dash through the snow - or the craft aisle - to find clever cubes of STYROFOAM™ brand foam and embossed paper for this very square fellow. Makes a great quick gift! Designed by Kathleen George for The Dow Chemical Company
Craft Time: 60+ minutes
 
 
 
 
Get exclusive offers about this product and more!
 
 

Material List

  • STYROFOAM™ Brand Foam Block- 18" x 4" x 4"
  • STYROFOAM™ Brand Foam Cubes- 5" and 3"
  • Acrylic Paint- Orange
  • 12" X 12” White Embossed Scrapbooking Paper- 3 Sheets
  • Coordinating Decorative Papers: Stripe; Polka Dot; Pink Solid; Black Solid
  • 1/8" X 6" Wooden Dowels- Two
  • Pom Poms, Two Each: 1/4" Light Pink; 1" Dark Pink Tinsel
  • Chenille Stem- Dark Pink
  • 1/2"Assorted Buttons- Nine
  • 3/8" Wiggle Eyes- Two
  • Serrated Knife
  • Candle Stub Or Paraffin
  • Pencil
  • Ruler
  • Wooden Chopstick
  • Round Paintbrush
  • Disposable Palette
  • Water Basin
  • Paper Towels
  • 3/8" Hole Punch
  • Scissors
  • Straight Pins
  • Craft Knife With Sharp Blade
  • Low-Temp Glue Gun And Glue Sticks
  • Thick, White Craft Glue
 

Project Instructions

Step: 1

Wax serrated knife with candle stub or paraffin; cut 4" cube from foam block. Set aside remainder of foam block for future project.


Step: 2

Cut the following strips from white embossed paper to cover foam cubes: one 3-1/2" x 12"; two 4-1/2" x 8-1/4"; two 5-1/2" x 10-1/4". In addition, cut one 2-3/4", one 3-3/4", and one 4-3/4" square from white embossed paper; set aside.


Step: 3

Overlap two short ends of 4-1/2"-wide strips 1/4" to create one 4-1/2" x 16-1/4" strip; glue overlapped ends to secure. Repeat with 5-1/2" strips, creating one 5-1/2" x 20-1/4" strip; glue ends to secure. Score and fold each paper strip 1/2" from top of long edge to make sharp crease.


Step: 4

Beginning and ending in center of one side of each cube to prevent visible seams, wrap appropriate paper strip around four sides of each foam cube, allowing paper to extend 1/2" above top edge of cube; do not glue yet. Use fingers to crimp paper at cube corners; remove paper and crisply fold at crimp marks.


Step: 5

Glue and pin paper strip around cube sides, overlapping ends. Clip paper corners above foam and fold excess down to top of each cube; glue and pin to secure. Glue paper squares to tops of cubes. Use glue gun to glue cubes together as shown; align all seams at back of snowman.


Step: 6

Cut two 1" x 6" strips from striped paper; glue paper around dowels. Glue light pink pom poms to dowel ends. Use craft knife to poke small hole into each side of body; glue dowel ends into cube for arms.


Step: 7

Cut two 3/4" x 12" strips from striped paper for scarf, noting stripe position. Wrap and glue one piece around snowman's neck; cut second strip in half. To curl scarf tails, gently pull paper strips over side of pencil. Glue tails to neck as shown. Cut 3/4" fringe into scarf ends.


Step: 8

Paint chopstick tip orange; let dry. Use craft knife to poke small hole into center of face; glue nose into hole.


Step: 9

Refer to photo to glue wiggle eyes to face. For cheeks, punch two circles from pink paper; glue to face. Cut narrow "C" shape from black paper for mouth; glue in place.


Step: 10

Cut 1/2" x 10" strip from polka dot paper and glue down center front of snowman. Glue buttons to paper. Trim and bend chenille stem to fit over head; glue ends into head and tinsel pom poms over ends for earmuffs.


Tips

With a little coaching, the kids can cut out the paper strips and assemble the snowman on their own.