Recycled Votive Candleholder
Add to Favorites Print

Recycled Votive Candleholder

Transform your old bathroom light fixture into a modern votive holder with a bit of Krylon® spraypaint and glass votives.

Designed by Colette George, courtesty of Krylon®.

Craft Time: 60+ minutes
Uses Recycled Items: Yes
 
 
 
 
Get exclusive offers about this product and more!
 
 
 Krylon® Indoor Outdoor Primer, small

Krylon® Indoor Outdoor Primer

 

Material List

  • Krylon Indoor/Outdoor Primer - Black
  • Krylon Brushed Metallic Paint - Oil Rubbed Bronze
  • Old Bath Bar Light Fixture
  • Glass Votive Holders (To fit inside each opening)
  • Votive Candles
  • Sandpaper, 220 Grit
  • masking Tape
  • Newspaper or Drop Cloth
 

Project Instructions

Cover your work surface with old newspaper or a drop cloth to protect it from overspray.

Disassemble fixture, removing wiring, bulbs, glass globes, plastic pieces and other items that can be removed from the metal fixture. Thoroughly clean metal surface that you will be painting so it is free of grease, film, dust, and lint.

Following the instructions on the can, apply the Black Primer first. Use short sweeping strokes to prevent overspray. Apply several light coats versus on heavy coat. If paint is applied too heavily, it might puddle or run; if this happens, sand smooth and reapply primer. Let dry.

Paint fixture with Oil Rubbed Bronze paint, covering all surfaces. Again, use several light coats. Let dry completely.

Insert glass votive holders and candles into each opening where lightbulbs used to fit.