Project Instructions

Step 1 Gather the Bead Gallery® black/gold-tone vintage sliders and the RSVP pearl chain. You will need to make the following lengths: four - 1-pearl links and four - 2-pearl links.

Step 2 Open the loops in the four 1-pearl links from Step 1 and attach two pearls side by side to a vintage slider. Gather the RSVP gold-tone 5-prong spacer and attach these two pearls to the second and fourth loop in the spacer (skip loop #3). Repeat on another vintage slider and using the second gold-tone 5-prong spacer. These two vintage sliders will be the two outside sliders in the bracelet.

Step 3 Now take the vintage slider with two pearls on one side from Step 2 above, and attach two 2-pearl links, side by side on the opposite side of the two individual pearls. Reference photo.

Step 4 Repeat Step 3 using the second vintage slider from Step 2.

Step 5 Now gather the third and last vintage slider and the first and second vintage slider from Steps 3 and 4 above. This third vintage slider will be the connecter between the first and second and will secure the bracelet. Attach the open end of the four 2-pearl links to this middle vintage slider.

Step 6 Gather the RSVP gold heart chain and the Bead Landing™ gold-tone jump rings. Measure the gold-tone heart chain to be the same length as the bracelet is now with the sliders and pearl strands. Cut with wire cutters and measure a second strand.

Step 7 Attach a gold-tone jump ring to each end of the gold-tone heart chain and attach one strand to the first loop in the gold-tone 5-prong spacer. Repeat for the other spacer so the chain is lying in a straight line against the vintage sliders.

Step 8 Repeat Step 7 using the second strand of gold-tone heart chain on the last loop of the gold-tone 5-prong spacer.