Aleene's® Spray Acrylic Sealer™ Gloss provides a protective, clear finish to a variety of surfaces.  You put a lot of effort into your projects...give them the durael protection they deserve!  Spray Acrylic Sealer provides a protective, clear finish to a variety of surfaces.  For use with indoor or outdoor projects. 

 Directions for use:

1. Use in well ventilated area.
2. Use at room temperature and low humidity.
3. Be sure surface to be sprayed is dry and dust-free
4. Shake can well before applying.
5. Holding can upright 10" to 12" from surface, spray with a slow, even side to side motion.
6. Surface should have an overall wet look, but avoid over-applying to prevent drips for soak-through
7. Apply as many coats as desired.  2-3 light coats is better than 1 heavy coat.  Allow to dry between coats.
8. After spraying, turn can upside down and spray until only clear gas appears.
9. Wipe valve opening
10. This will prevent clogging and sputtering on future applications
11. Spray button can be removed for cleaning