Super Spookster Tee
Make this All Hallows Eve frighteningly fun with Tulip® Glow Paints! Add your favorite colors to a dual-toned tee for super spooky effects.
- Tulip® Glow Paint Party Pack
- Tulip® Fashion Form™
- Tulip® Craft Mat™ (9-inches x 9-inches)
- Sewing Needle (with large eye)
- Embroidery Floss (Orange)
- Sewing Pins
- White Chalk (sharpened to a point)
- Paper Towels
Note: Click on the Download Pattern button on the bottom right of the page for the design pattern.
Using Craft Mat, measure 8-inches in from left side seam of lime shirt then use chalk to make a small mark. Cut vertically through both layers of shirt to remove right side of shirt, using the chalk line as a guide. Repeat step with black T-shirt.
Line up narrow section (left side) of lime T-shirt with larger section (right side) of black T-shirt. Insert Craft Mat under seam, line up edges with green edge overlapping black about ½-inch then use pins to hold in place. Move Craft Mat down seam of shirt to making pinning easier. Thread needle with three strands of embroidery floss then tie ends together, creating a six-strand section of embroidery floss. Insert Craft Mat under neckline so work surface is protected, then sew a basting stitch down length of shirt, moving craft mat along length as you sew. Repeat for backside of shirt.
Flip over patterns then use chalk to lightly trace along lines, holding pattern up to window if needed to see lines. Position patterns chalk side down on fabric and hold in place then run a finger over lines to transfer design in chalk onto fabric. Transfer all patterns. Insert Fashion Form into shirt. Start flow of Glow Paint on paper towel using an even pressure on bottle for a smooth line. Fill in areas with colors shown, using a sewing pin to pop any bubbles that may form in the paint. Let dry.