Step: 1

Paint the doll head Fleshtone. Let dry.

Step: 2

Cut the dress and sleeves from Red felt using pattern provided.

Step: 3

Bring edges of dress together to make a cone, overlap slightly, then glue. Repeat process for sleeves.

Step: 4

Trim top 3/8” from tip of cone and sleeves. Position sleeves at sides of body, and then glue them in place.

Step: 5

Position the doll head so the bottom edge of the head is flush with the top front of the neck (doll hear will extend past back of neck slightly). Glue doll head in place.

Step: 6

Select desired rub-on face, then trim it from the sheet. Position face on head, taping edges if necessary. Use the craft stick to rub the face onto the head, then carefully remove the plastic sheet. Rub the cheek area with Pink powder blush.

Step: 7

Tie multiple strands of doll hair into a bundle, then glue hair on head.

Step: 8

Thread two 5/8” wood beads onto the White chenille stem. Fold each edge of the chenille stem over about 1/2”.

Step: 9

Apply lo-temp glue to the end of the chenille stem, then position it as far as possible into the sleeve. Hold a moment while glue sets. Repeat for other sleeve.

Step: 10

Slide beads over to edge of sleeve. Apply Glimmer Hearts to chenille stem as shown in photo. Tie Red or Pink ribbon between each heart on garland.

Step: 11

Cut the top off one Pink Glimmer Heart, then apply it under the chin as a collar. Tie a Red ribbon bow, then glue it on the collar. Glue the Pink button on the dress.

Step: 12

Cut a large White felt heart for the wings, then glue it in place at the back of the body.