Vintaj® Embossed Necklace
Material List
- Vintaj® Altered Blank Circle, 34mm
- Vintaj® Rectangle Tag Altered Blank, 21mm
- Jewelry Essentials™ Jump Rings, 6mm
- Jewelry Essentials™ Head Pins, 2"
- Vintaj® Sizzix® DecoEmboss Die – Moonlit Night
- Vintaj® Sizzix® BIGkick
- Vintaj® Reliefing Block
- Bead Gallery® Glass Leaf, Large – Peridot
- Bead Gallery® Round Glass Bead Mixes, 6mm – Sapphire/Amethyst and Opaque Green
- Jewelry Essentials™ Beading Cord, 20 lb. – Bamboo
Project Instructions
Step 1 Place the blank circle face up on the raised side of the DecoEmboss die. Close the die holding the blank in place.
Step 2 Sandwhich the die between the clear plates on top of the solo shim and platform of the machine. Crank it through one time.
Step 3 Open the die and hold your thumb over the blank or edges of the die to slightly flex the folder to pop out the blank.
Step 4 Use the white side of the Metal Reliefing Block to highlight the raised areas of the design.
Step 5 Repeat Steps 1 to 4 to create a design on the small rectangle tag.
Step 6 String beads onto head pins. Use round nose pliers to form a simple loop.
Step 7 Connect pendant and beaded drops with jump rings. Knot the center of beading cord to the top jump ring. Simply tie ends to open and close necklace.
