Dreaming of Daisies Tie-Dye T-Shirt by Tulip®
Add to Favorites Print

Dreaming of Daisies Tie-Dye T-Shirt by Tulip®

Watch your creativity awaken when you transform a simple bulls-eye tie-dye design into big, bold daisies by just adding swoops of dimensional paint and a bit of sparkle with heat-set crystals.
Craft Time: 60+ minutes
Uses Recycled Items: No
Get exclusive offers about this product and more!

Material List

  • Tulip® One-Step Tie Dye Kit™ – Vibrant
  • Tulip® 3D Fashion Paint – Slick Black
  • Tulip® Glam-It-Up!™ Iron-On Glass Crystals – Clear (300 Ct.)
  • Tulip® Glam-It-Up!™ Cordless Heat-Setting Tool
  • T-Shirt, 100% Cotton – White
  • Plastic Tablecloth
  • Cardboard (to Insert Inside T-Shirt)
  • Iron

Project Instructions

Step 1 Prewash T-shirt without fabric softener. Do not dry.
Step 2 Cover work surface with plastic tablecloth.
Step 3 Lay damp T-shirt flat on prepared work surface.
Step 4 Beginning at upper right sleeve area about 1½" below top, pinch fabric together and tightly place rubber band. Add another rubber band about 3" down and another 4" down from second band.
Step 5 At bottom left of T-shirt, repeat banding by adding three similarly spaced rubber bands.
Step 6 Prepare the Lime, Violet and Blue dyes as directed.
Step 7 Squeeze the Blue dye on the first banded area, Violet in second and Lime in third section.
Step 8 Add dye to the bottom banded area. Be generous with the dyes to ensure color is saturated throughout the fabric.
Step 9 Cover with plastic tablecloth and let set for 6-8 hours.
Step 10 Leaving rubber bands in place, wash according to dye package instructions.
Step 11 Remove rubber bands and dry. Press.
Step 12 Place cardboard between layers of T-shirt for a firm painting surface and to prevent paint seepage.
Step 13 Using Black 3D paint, draw long loose flower petals emerging from center area of bursts. Refer to photo. Let dry.
Step 14 Add sparkle by using Tulip® Cordless Heat-Setting Tool to adhere crystals randomly on T-shirt.


To create extra crisp design lines on shirt while screen printing, first spray a layer of Aleene’s® Repositionable Tacky Spray™ onto shirt then press screen in place on shirt. Squeegee paint over screen per directions.

Craft Notes

Crafted for Michaels by Allee Mardeosian courtesy of iLoveToCreate®.