father’s day: rainbow loom® “all the way around” triple single bracelet

Time Required :
About 30 minutes
Difficulty Level :
Intermediate
Intermediate
You're somewhat experienced with the skills necessary to complete this project, but you haven't mastered all the elements, yet.

Instructions Print

Step 1
Have you tried the triple single pattern before? Whether you're new to it, or just need a refresher, watch the video on this page to get the hang of this technique.
Step 2
NOTE: Two looms are needed for this project.

The loom configuration is where the center column (B; use the diagram as a guide) is positioned one peg off of columns A and C. Follow instructions included in kit to extend loom and be sure the loom configuration is where the center column (B; use the diagram as a guide) is positioned one peg off of columns A and C.
Step 3
Working in the direction of the red arrow pointing up (or away), load loom with the color (or colors) of the three stripes, using the diagram as a guide:

Column A: Add a White rubber band from peg A1 to peg A2
Add a Grey rubber band from peg A2 to peg A3
Continue until the end, alternating colors.

Column B: Add a Grey rubber band from peg B1 to peg B2
Add a White rubber band from peg B2 to peg B3
Continue until the end, alternating colors.

Column C: Add a White rubber band from peg C1 to peg C2
Add a Grey rubber band from peg C2 to peg C3
Continue until the end, alternating colors.
Step 4
Push down all rubber bands.
Step 5
Add a layer of Black rubber band “triangles” over all three columns, using the diagram as a guide. Add the first one by wrapping a rubber band around peg A2, down to peg B2 and around to peg C2. Wrap a second one around A3, down to B3 and around C3. Continue to the end.
Step 6
Turn the loom around so the direction of the red arrow is pointing down (or toward you).
Step 7
Take the hook and place it in between the rubber bands on peg A13. Hook the bottom rubber band and move it to A12. Continue this process to the end.
Step 8
Repeat Step 6 for column C.
Step 9
Move the rubber band on peg B13 to B12. Continue moving the bands, one at a time, to the end.
Step 10
Move all rubber bands on peg C1 and peg A1 to B1.
Step 11
Take the hook and thread it through the inside of peg B1 so that it is all the way through the rubber bands. Put a loose rubber band onto the hook and hold onto the other side and pull the loose rubber band through. Thread side you are holding onto the hook.
Step 12
Gently pull the rubber bands off of the loom with a side to side motion. Set aside.
Step 13
Attach C-clip to other end to close bracelet.
 

Supplies Available Online

    Products

  • Add to cart options
    $2.99
  • Add to cart options
    $14.99
  • Product Actions

Supply List

  • Rainbow Loom® Refill Bands (sku 10308294)
  • Rainbow Loom® with Metal Hook (sku 10347513)
 
+ View More

Instructions

Step 1
Have you tried the triple single pattern before? Whether you're new to it, or just need a refresher, watch the video on this page to get the hang of this technique.
Step 2
NOTE: Two looms are needed for this project.

The loom configuration is where the center column (B; use the diagram as a guide) is positioned one peg off of columns A and C. Follow instructions included in kit to extend loom and be sure the loom configuration is where the center column (B; use the diagram as a guide) is positioned one peg off of columns A and C.
Step 3
Working in the direction of the red arrow pointing up (or away), load loom with the color (or colors) of the three stripes, using the diagram as a guide:

Column A: Add a White rubber band from peg A1 to peg A2
Add a Grey rubber band from peg A2 to peg A3
Continue until the end, alternating colors.

Column B: Add a Grey rubber band from peg B1 to peg B2
Add a White rubber band from peg B2 to peg B3
Continue until the end, alternating colors.

Column C: Add a White rubber band from peg C1 to peg C2
Add a Grey rubber band from peg C2 to peg C3
Continue until the end, alternating colors.
Step 4
Push down all rubber bands.
Step 5
Add a layer of Black rubber band “triangles” over all three columns, using the diagram as a guide. Add the first one by wrapping a rubber band around peg A2, down to peg B2 and around to peg C2. Wrap a second one around A3, down to B3 and around C3. Continue to the end.
Step 6
Turn the loom around so the direction of the red arrow is pointing down (or toward you).
Step 7
Take the hook and place it in between the rubber bands on peg A13. Hook the bottom rubber band and move it to A12. Continue this process to the end.
Step 8
Repeat Step 6 for column C.
Step 9
Move the rubber band on peg B13 to B12. Continue moving the bands, one at a time, to the end.
Step 10
Move all rubber bands on peg C1 and peg A1 to B1.
Step 11
Take the hook and thread it through the inside of peg B1 so that it is all the way through the rubber bands. Put a loose rubber band onto the hook and hold onto the other side and pull the loose rubber band through. Thread side you are holding onto the hook.
Step 12
Gently pull the rubber bands off of the loom with a side to side motion. Set aside.
Step 13
Attach C-clip to other end to close bracelet.