Craft Smart® Leaf Votive Holder
Add to Favorites Print

Craft Smart® Leaf Votive Holder

Try finding all different shapes and sizes of real leaves for a unique look!

Designed by Patti Kimle, courtesy of Polyform.

Craft Time: 60+ minutes
Uses Recycled Items: No
Get exclusive offers about this product and more!
 Sculpey® Clay Tool Starter Set, small

Sculpey® Clay Tool Starter Set

 Sculpey® Etch 'N Pearl, small

Sculpey® Etch 'N Pearl


Material List

  • Craft Smart® Clay – Tan and Brown
  • Sculpey® Clay Tool Starter Set
  • Sculpey® Etch 'N Pearl Tool Set
  • Pasta Machine
  • Acrylic Roller
  • Real Leaves (or Leaf Rubber Stamps)
  • Mica Powders – Colors of Choice (2-3)
  • Glass Votive, 4"

Project Instructions

Do not use unbaked clay on unprotected furniture or finished surfaces. Start with clean hands and work surface area. Good work surfaces include wax paper, metal baking sheet, or disposable foil. Knead clay until soft and smooth. For best results, clean your hands in between colors. Shape clay, pressing pieces together firmly. Bake on ovenproof glass or metal surface at 275 °F (130 °C) for 15 minutes per 1/4" (6 mm) thickness. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME. Wash hands after use. Baking should be completed by an adult.

Begin by preheating oven to 275 °F (130 °C). Test temperature with oven thermometer for perfectly cured clay. For best results, condition all clay by running it through the clay dedicated pasta machine for several passes on the widest setting. Fold the clay in half after each pass and insert the fold side into the rollers first.

Using pasta machine on #3 setting, make clay sheets of each color. Make one ½" wide Brown strip and press around glass votive rim. Trim ends and smooth seam with fingers. Use the Etch ‘N Pearl tools to press designs into the edging.

Lay real leaf on either color clay sheet and roll firmly across it with the acrylic roller. Remove the leaf from the clay sheet. If you are using a stamp, spray leaf stamp with water and press the stamp firmly into the clay. With knife tool from the Clay Tool Starter Set, carefully cut around the outline of the leaf, making the stem a little wider.

Gently press the clay leaf to the surface of the glass. Be careful to not distort the lead impression. Repeat with additional leaves in both clay colors until the area is filled.

Use mica powders to highlight the clay designs.

Bake at 275 ºF (130 °C) for 15 minutes. Allow to cool completely.




Baby wipes are a great way to clean your hands after working with clay!

Craft Notes

Oven should only be used by and adult.