Project Instructions

Step 1: Wash glass in warm soapy water. Allow to dry.

Step 2: Moisten a paper towel with rubbing alcohol and wipe glass to remove any residue.

Step 3: Remove desired letters from backing sheet and position on glass where desired.

Step 4: Dab flat end of a pouncer into a puddle of Yellow Gold metallic paint.

Step 5: Dab Yellow Gold metallic paint over the opening of each letter.

Step 6: Lift the adhesive stencil straight up carefully to not smear or smudge the wet design.

Step 7: Clean the adhesive stencil immediately under running water; blot dry and return to backing sheet.

Step 8: Embellish the stenciled monogram with dimensional polka dots vertically down the width of each letter. Apply Raspberry Ice dimensional dots of paint directly from the bottle

Step 9: All painted glass projects should be cured to increase the paint’s durability. Use either of the following techniques:

Bake to Cure – Place dry painted glassware into cool oven. Set oven to 350°F and bake for 30 minutes. Glass must heat gradually with the oven to avoid breakage. Do NOT place glass in a hot oven. After 30 minutes, turn the oven off. Allow glass to cool completely in oven. Wait 72 hours before using.

NOTE: Use only the Air Cure technique for projects decorated with Glitter Glass Paints.

Air Cure – Air dry completed projects for 21 days before using.