monster tail™ squared fishtail bracelet

Time Required :
About 30 minutes
Difficulty Level :
Beginner
Beginner
You're new to the skills necessary to complete this project, or maybe you've tried them just once or twice before.

Instructions Print

Step 1
Download your Original Monster Tail™ grid here.

Using the Monster Tail™ grid as a guide, take a White Rainbow Loom® band, twist it into a figure 8 and stretch it across from peg B1 to peg B5.
Step 2
Load five more bands to the loom (without twisting) as directed below, using the Monster Tail™ grid as a guide:
Add a Pink band from peg A3 to peg C3
Add a White band from peg B1 to peg B5
Add a Pink band from peg A3 to peg C3
Add a White band from peg B1 to peg B5
Add a Pink band from peg A3 to peg C3
Step 3
Using the Monster Tail™ hook, grab the bottom White band from the outside of the loom on peg B1 and pull it over all of the bands and pegs, moving it towards the center.
Step 4
Repeat Step 3 for the White band on peg B5.
Step 5
Grab the bottom Pink band from the outside of the loom on peg A3 and pull it over all of the bands and pegs, moving it towards the center.
Step 6
Repeat Step 3 for the Pink band on peg C3.
Step 7
Add a White band from peg B1 to peg B5 and a Pink band from peg A3 to peg C3.
Push the bands down on the pegs and as you add another band.
Step 8
Repeat Steps 3-7 until bracelet reaches desired length.
Step 9
Gently pull off of pegs. Pull out the last four bands and close with C-clip.
Step 10
Attach other end of bands to a C-clip to create bracelet.
 

Supplies Available Online

    Products

  • Add to cart options
    $7.99
  • Product Actions

Supply List

  • Monster Tail™ Loom (sku 10350030)
 
+ View More

Instructions

Step 1
Download your Original Monster Tail™ grid here.

Using the Monster Tail™ grid as a guide, take a White Rainbow Loom® band, twist it into a figure 8 and stretch it across from peg B1 to peg B5.
Step 2
Load five more bands to the loom (without twisting) as directed below, using the Monster Tail™ grid as a guide:
Add a Pink band from peg A3 to peg C3
Add a White band from peg B1 to peg B5
Add a Pink band from peg A3 to peg C3
Add a White band from peg B1 to peg B5
Add a Pink band from peg A3 to peg C3
Step 3
Using the Monster Tail™ hook, grab the bottom White band from the outside of the loom on peg B1 and pull it over all of the bands and pegs, moving it towards the center.
Step 4
Repeat Step 3 for the White band on peg B5.
Step 5
Grab the bottom Pink band from the outside of the loom on peg A3 and pull it over all of the bands and pegs, moving it towards the center.
Step 6
Repeat Step 3 for the Pink band on peg C3.
Step 7
Add a White band from peg B1 to peg B5 and a Pink band from peg A3 to peg C3.
Push the bands down on the pegs and as you add another band.
Step 8
Repeat Steps 3-7 until bracelet reaches desired length.
Step 9
Gently pull off of pegs. Pull out the last four bands and close with C-clip.
Step 10
Attach other end of bands to a C-clip to create bracelet.