Images


rainbow loom® pumpkin bracelet

Loom yourself a festive Rainbow Loom® Pumpkin bracelet to get ready for the upcoming fall.
Loom yourself a festive Rainbow Loom® Pumpkin bracelet to get ready for the upcoming fall.
Time Required :
Over an hour
Difficulty Level :
Intermediate
Intermediate
You're somewhat experienced with the skills necessary to complete this project, but you haven't mastered all the elements, yet.

Project Instructions

step 1
NOTE: Two looms were used to make this project.
 
Download your Original Rainbow Loom® grid Here.
 
The loom configuration is where the center column B (use the diagram as a guide), is positioned one peg off of columns A and C. Use directions included in loom to connect two looms together lengthwise. See diagram. 
step 2
Working in the direction of the red arrow pointing up (or away), load loom with color of the border, using the diagram as a guide. 
step 3
Load the first three rubber bands according to the directions below, using the diagram as a guide:
  • Add an Orange rubber band diagonally from peg B1 to peg C2
  • Add a Neon Green rubber band diagonally from peg B1 to peg C2
  • Add a White rubber band from peg B1 to B2.
step 4
Continue to load the loom according the directions below, using the diagram as a guide:
  • Add a Neon Green rubber band diagonally from peg C1 to peg B3
  • Add a White rubber band from peg B2 to peg C3
  • Add an Orange rubber band diagonally from peg C3 to peg B4.
  • Continue this pattern until you get to the Neon Green rubber band diagonally from peg C4 to peg B6.
  • Next, add a White rubber band from peg B5 to peg B6
  • Add an Orange rubber band diagonally from peg C5 to peg B6.
step 5
To create the first pumpkin, follow the directions below, using the diagram as a guide:
  • Add an Orange rubber band diagonally from peg B6 to peg A6
  • Add an Orange rubber band from peg A6 to peg A7
  • Add an Orange rubber band diagonally from peg A7 to peg B8
  • Add an Orange rubber band diagonally from peg B6 to peg C6
  • Add an Orange rubber band from peg C6 to peg C7
  • Add an Orange rubber band diagonally from peg C7 to peg B8
  • Add an Orange rubber band diagonally from peg C7 to B7
  • Add an Orange rubber band diagonally from peg C6 to peg B7
  • Add an Orange rubber band diagonally from peg B6 to peg B7
  • Add an Orange rubber band diagonally from peg A6 to peg B7
  • Add an Orange rubber band diagonally from peg A7 to peg B7
  • Add an Orange rubber band diagonally from peg B8 to peg B7
  • Wrap an Orange rubber band around peg B7 twice, as a capping band.
step 6
To continue bracelet, repeat Steps 3-5 for desired length. 
step 7
When you reach the end, follow the directions below, using the diagram as a guide:
  • Add a White rubber band diagonally from peg C24 to peg B26
  • Add an Orange rubber band diagonally from peg C25 to peg B26
  • Add a Neon Green rubber band from peg B25 to peg B26
  • Wrap a White rubber band twice around peg B26 as a capping band.
step 8
Turn loom around so the arrows are pointing down (or towards you). 
step 9
Using hook included in kit, unhook bands according to the directions below, using the diagram as a guide:
  • Reach in through peg B26, and moving the capping band out of the way, grab the Neon Green rubber band and move it forward to peg B25.
  • Reach in through peg B26, and moving the capping band out of the way, grab the Orange rubber band and move it diagonally to peg C25.
  • Reach in through peg B26, and moving the capping band out of the way, grab the White rubber band and move it diagonally to peg C24.
  • Reach in through peg B25, and moving the capping band out of the way, grab the Orange rubber band and move it diagonally to peg B24.
  • Reach in through peg B25, and moving the capping band out of the way, grab the Neon Green rubber band and move it diagonally to peg C23.
  • Continue in this pattern until peg B23.
  • Move the White rubber band from peg B23 to peg B22.
  • Move the Orange rubber band from peg C22 to peg B22.
step 10
To unhook pumpkin, remove bands according to the directions below, using the diagram as a guide:
  • Reach in through peg B21, and moving the capping band out of the way, grab top Orange rubber band and move it to the correct peg.
  • Continue around the pumpkin.
  • Reach in through peg B22, and moving the capping band out of the way, grab top Orange rubber band and move it diagonally to peg A21.
  • Reach in through peg A21, and moving the capping band out of the way, grab top Orange rubber band and move it diagonally to peg A20.
  • Reach in through peg A20, and moving the capping band out of the way, grab top Orange rubber band and move it diagonally to peg B20.
  • Repeat on the other side.
step 11
Continue unhooking in same manner as in Steps 9 and 10. 
step 12
Take the hook and thread it through the inside of peg B1 so that it is all the way through the rubber bands. Put a loose rubber band onto the hook and holding onto the other side, pull the loose rubber band through. Thread side you are holding onto the hook. 
step 13
Attach a C-clip. 
step 14
Gently remove bracelet from loom, using a side-to-side motion. 
step 15
Attach end to C-clip from Step 13 to make bracelet. 
step 16
Use metal hook to slip knot a Neon Green rubber band at the top center of the Orange pumpkin. Use image as a guide. 
+ View More
 

what you'll need

Product Actions

    Products

  • $14.99 $9.99
    Item# 10347513

    In Stock

    • +
    • -
  • In Stock

    • +
    • -
  • $2.99 $1.66
    Item# 10312146

    Variations

    • Color
      Please select Color

    In Stock

    • +
    • -
  • $2.99 $1.66
    Item# 10308298

    Variations

    • Color
      Please select Color

    In Stock

    • +
    • -