Time Required :
About 30 minutes
Beginner
Beginner
You're new to the skills necessary to complete this project, or maybe you've tried them just once or twice before.
Step 1
Project Note: This project is featured in the Holiday Décor Guide, but was made with black glitter (10185450) instead of Silver, and Silver Gray vinyl (10498455) instead of black.
 
Remove the cap from the top of the ornament and set aside.
Step 2
Pour a generous amount of Glitter Ornament Adhesive™ into the ornaments and swirl around until the entire inside surface of the ornament is coated in adhesive. Pour excess back into the bottle. 
Step 3
Pour a generous amount of glitter into the ornament. Cover the top of the ornament with a paper towel and shake the glitter around until the inside is covered in glitter. If you need more glitter, pour more glitter in the ornament and repeat this step. Shake out excess glitter and discard. Set ornament aside to dry.
 
TIP: Once the glue dries, the glitter will be more visible and will shimmer. The glue does dry clear.
Step 4
Click here to go to Cricut® Design Space™. 
Step 5
Cut “Santa Camera” and the camera lens out of black vinyl, the small dot from red vinyl and the lens glare from white vinyl. Weed excess vinyl and discard. 
Step 6
Clean the outside surface of the ornament with rubbing alcohol. 
Step 7
Cut a piece of contact paper to fit over theSanta Camera” and lens cutout. Peel the back from the contact paper and place over vinyl cutout. Burnish with your fingers, thoroughly, and then peel the contact paper from the vinyl backing. The vinyl cutout should be transferred to the contact paper. 
Step 8
Center the vinyl onto the ornament. Burnish with your fingers, thoroughly, and carefully peel the contact paper from the ornament, leaving the vinyl on the ornament. 
Step 9
Add the red dot next to the top right of the lens and the glare on the inner circle of the lens in the top right curve. Use image as a guide. 
Step 10
Return cap to the top of the ornament. 
Step 11
Cut 12" of red ribbon and thread it through the loop on the top of the ornament’s cap. Tie a knot in the ribbon for a hanger, and trim end to desired length.
 
Share your project photos with #MakeItWithMichaels 
Materials

Product Actions

Product Actions

Materials
 

    Products

  • 809188601
    Item # 10498462 
    $1.42
    $1.99
    • Color: Black
    • Size: 12" x 12"
    • Color: Black
    • Size: 12" x 12"
    • Color: Black
    • Size: 12" x 12"
    $1.42
    $1.99
    Add to cart options
    • -
    • +
    $1.42
    $1.99
  • 809188601
    Item # 10498461 
    $1.42
    $1.99
    • Color: White
    • Size: 12" x 12"
    • Color: White
    • Size: 12" x 12"
    • Color: White
    • Size: 12" x 12"
    $1.42
    $1.99
    Add to cart options
    • -
    • +
    $1.42
    $1.99
  • 809188601
    Item # 10498465 
    $1.42
    $1.99
    • Color: Red
    • Size: 12" x 12"
    • Color: Red
    • Size: 12" x 12"
    • Color: Red
    • Size: 12" x 12"
    $1.42
    $1.99
    Add to cart options
    • -
    • +
    $1.42
    $1.99
  • 809188601
    Item # 10525256 
    $3.99
    $9.99
    clearance
    clearance
    $3.99
    $9.99
    clearance
    Add to cart options
    $3.99
    $9.99
    clearance
    *No additional coupons or discounts may be applied. While supplies last. No rain checks.
  • 809188601
    Item # 10145847 
    $11.99
    $11.99
    Add to cart options
    $11.99
    Oversized shipping applies: $1.99 Per Item
  • 809188601
    $6.99
    Add to cart options
    • -
    • +
    $6.99
  • 834499190
    Item # 10226100 
    $3.99
    • Color: Sterling
    • Size: 2 oz
    • Color: Sterling
    • Size: 2 oz
    • Color: Sterling
    • Size: 2 oz
    $3.99
    Add to cart options
    $3.99
 
Tools

Product Actions

Tools
 

    Products

  • 834499190
    $5.99
    Add to cart options
    $5.99
 

Product Actions

You’ll Also Need
  • Computer
  • Rubbing Alcohol
  • Paper towels
  • 1 - Offray® Spool'o Ribbon, 1/8" – Red (sku 10119372)
+ View More