CraftSmart® Striped Oval Ornament
Create your own Christmas ornament using polymer clay and your creativity!
Designed by Phoebe Doehring courtesy of Polyform.
- CraftSmart® Polymer Clay - Pink, White, Red and Green
- Clay Conditioning Machine
- Sculpey® Clay Tool Starter Set
- Premo! Sculpey® Glitter set - Brights
- Sculpey® Bake & Bond Bakeable Adhesive
- Clay Extruder
- Craft Wire, 24ga
- Wire Cutters
- Clay-Dedicated Baking Sheet
- Ornament Hook
- Ribbon - Red (optional)
- Low heat glue gun and glue sticks (optional)
Knead clay for two minutes. Bake on oven-proof glass or metal surface at 275°F (130° C) for 15 minutes per ¼" (6mm) of thickness. Do not use in microwave oven. Do not exceed the above temperatures or recommended baking time. Baking should be completed by an adult. Wash hands after use.
With clay conditioning machine at #1 (thickest) setting, make white sheet. Cut out ornament and ornament top. Gently round edges with your finger. With clay conditioning machine at #1 setting, make small green sheet. Cut ornament top. With clay conditioning machine at #2 setting, make pink and red sheets. Cut stripes. Using Bake & Bond Bakeable Adhesive, attach pieces on ornament, attaching ornament top last to overlap stripes at top.
Assemble clay extruder with small circle disk. Extrude green strings long enough to outline the stripes. Roll extruded strings in green glitter. Using Bake & Bond Bakeable Adhesive, attach glittered strings to ornament. Press ornament top in green glitter and attach with Bake & Bond adhesive.
Cut 1½" wire length. Make loop by wrapping wire around a pen and twisting the ends. Add drop of Bake & Bond Bakeable Adhesive to twisted end and insert into ornament top.
Bake at 275ºF for 15 minutes. Allow to cool completely. Add ornament hook. If desired, make ribbon bow and attach with glue gun.
Do not use unbaked clay on unprotected furniture or finished surfaces.
Always use a clay-dedicated baking sheet for your clay projects.
Oven should only be used by and adult.