tulle chevron cuff-style bracelet

Time Required :
About an hour
Difficulty Level :
Intermediate
Intermediate
You're somewhat experienced with the skills necessary to complete this project, but you haven't mastered all the elements, yet.

Instructions Print

Step 1
Cut eight 24" lengths of tulle.
Step 2
Gather together and knot approximately 6" from one end.
Step 3
Tape down to work surface.
Step 4
Separate and lay the eight strands flat. Then separate into two sections: left four strands and right four strands.
Step 5
Starting with the far left strand, make a 90° angle over the second strand (making a “4” like shape) and loop the first strand underneath the second and pull tight. Repeat with same two strands for two knots.
Step 6
Repeat for the next two strands.
Step 7
Repeat Steps 5-6 for right section in reverse order (backwards “4” like shape).
Step 8
Repeat Step 5 for the two center strands: one knot with left as a tying strand and one in reverse order.
Step 9
Continue the pattern, repeating Steps 5-8 until desired length is achieved for the cuff.
Step 10
Gather the remaining tulle strands, separate into three sections and braid. Tie a loose knot.
Step 11
Remove from work surface and discard tape.
Step 12
Take out end knot from Step 2, separate tulle strands into three sections and braid.
Step 13
Untie loose knot from Step 10, attach lobster claw clasp and secure with Weldbond® adhesive. TIP: Use Scotch tape to hold ends together. Trim and glue in clasp.
Step 14
Share your project photos with #MakeItWithMichaels 
 
 

Supplies Available Online

Supply List

  • Color Duck Tape® Brand Duct Tape, Black (sku 10360278)
  • Scotch® Magic™ Tape, 1/2" (sku 10180752)
  • Bead Landing™ Lobster Claw Clasp, 12mm (sku 10442968)
  • Weldbond® Universal Adhesive (sku 10404940)
  • Celebrate It™ Occasions™ Tulle with Glitter (sku 10217906)
  • Fiskars® Premier All-Purpose Craft Scissors (sku 10404129)
 
+ View More

Instructions

Step 1
Cut eight 24" lengths of tulle.
Step 2
Gather together and knot approximately 6" from one end.
Step 3
Tape down to work surface.
Step 4
Separate and lay the eight strands flat. Then separate into two sections: left four strands and right four strands.
Step 5
Starting with the far left strand, make a 90° angle over the second strand (making a “4” like shape) and loop the first strand underneath the second and pull tight. Repeat with same two strands for two knots.
Step 6
Repeat for the next two strands.
Step 7
Repeat Steps 5-6 for right section in reverse order (backwards “4” like shape).
Step 8
Repeat Step 5 for the two center strands: one knot with left as a tying strand and one in reverse order.
Step 9
Continue the pattern, repeating Steps 5-8 until desired length is achieved for the cuff.
Step 10
Gather the remaining tulle strands, separate into three sections and braid. Tie a loose knot.
Step 11
Remove from work surface and discard tape.
Step 12
Take out end knot from Step 2, separate tulle strands into three sections and braid.
Step 13
Untie loose knot from Step 10, attach lobster claw clasp and secure with Weldbond® adhesive. TIP: Use Scotch tape to hold ends together. Trim and glue in clasp.
Step 14
Share your project photos with #MakeItWithMichaels