1. Home
  2. /
  3. MichaelsPro - Buy In Bulk /
  4. Bulk Crafts & Hobbies /
  5. Crafting Embellishments
  6. / 6 Pack: We R Memory Keepers® Spin It™ Pro Tumbler Turner

6 Pack: We R Memory Keepers® Spin It™ Pro Tumbler Turner

$158.64
$26.44 ea.
  • -
  • +

6 Pack: We R Memory Keepers® Spin It™ Pro Tumbler Turner

Item # MP659413 
Online Only 
$158.64
$26.44 ea.
Michaels Pro

6 Pack: We R Memory Keepers® Spin It™ Pro Tumbler Turner

img
Michaels Pro
$158.64
$26.44 ea.
  • -
  • +
Coupon Exclusion: No additional coupons or discounts may be applied. While supplies last. No rain checks.
Ground Ship Only: Item may not be shipped 2nd Day or Next Day.
Shipping Restriction: Item may not be shipped to Hawaii or Alaska.
Shipping Restriction: Item may not be shipped to PO Boxes.

Description

Description

This Spin It Pro tumbler turner spinner is absolutely perfect for creatively personalizing tumblers. Add glittery embellishments to customize your project by placing the cup on the arm and giving it a spin!

Click here for instructions.

Details:
  • White with blue accents
  • 6 tumbler turners
  • Weight limit for Spin It is 13 oz. (368.5 g)
  • Do not use with cups that hold more than 32 fl. oz. (946 mL)
  • Do not use Spin It with objects taller than 8" (20.32 cm)
  • Avoid running for more than 6 hours at a time
  • Simple and easy to use
  • Perfect for personalizing tumblers
  • Read all instructions before use
  • Plastic, metal, and cord
Size Information:
  • 9.4" x 4" (23.8cm x 10.16cm) machine
  • 5.95" x 4.5" (15.11cm x 11.43cm) arm
  • 4.2" x 1.5" (10.6cm x 3.81cm) handle
Tips:
  • Use low speed setting to evenly dry epoxy
  • Use high speed setting to keep runny mediums from dripping
  • It is recommended to place newspaper or a drop cloth under cup to protect tool and work surface
  • After extensive use rotating arm may become loose. Tighten by rotating Ridged Base clockwise.
Cleaning epoxy from your machine:
  • Scrape as much material as you can from the surface using a stiff metal or plastic scraper.
  • Clean the residue with lacquer thinner, acetone, or rubbing alcohol (follow safety warnings on solvents, and provide adequate ventilation).
  • Once epoxy is removed, use a clean, wet cloth to remove any remaining solvents from the surface to avoid damaging, stripping or corroding the machine or arm.
Troubleshooting:
  • If rotating arm falls off, be sure to tighten before each use and check occasionally while the arm is rotating to ensure the arm is secure. Additionally, prop up the end of the base opposite the motor housing to counteract gravity and keep the arm from unscrewing.
  • If medium is sliding to either end of cup, prop up corresponding end of base to even out pooling.
This Spin It Pro tumbler turner spinner is absolutely perfect for creatively personalizing tumblers. Add glittery embellishments to customize your project by placing the cup on the arm and giving it a spin!

Click here for instructions.

Details:
  • White with blue accents
  • 6 tumbler turners
  • Weight limit for Spin It is 13 oz. (368.5 g)
  • Do not use with cups that hold more than 32 fl. oz. (946 mL)
  • Do not use Spin It with objects taller than 8" (20.32 cm)
  • Avoid running for more than 6 hours at a time
  • Simple and easy to use
  • Perfect for personalizing tumblers
  • Read all instructions before use
  • Plastic, metal, and cord
Size Information:
  • 9.4" x 4" (23.8cm x 10.16cm) machine
  • 5.95" x 4.5" (15.11cm x 11.43cm) arm
  • 4.2" x 1.5" (10.6cm x 3.81cm) handle
Tips:
  • Use low speed setting to evenly dry epoxy
  • Use high speed setting to keep runny mediums from dripping
  • It is recommended to place newspaper or a drop cloth under cup to protect tool and work surface
  • After extensive use rotating arm may become loose. Tighten by rotating Ridged Base clockwise.
Cleaning epoxy from your machine:
  • Scrape as much material as you can from the surface using a stiff metal or plastic scraper.
  • Clean the residue with lacquer thinner, acetone, or rubbing alcohol (follow safety warnings on solvents, and provide adequate ventilation).
  • Once epoxy is removed, use a clean, wet cloth to remove any remaining solvents from the surface to avoid damaging, stripping or corroding the machine or arm.
Troubleshooting:
  • If rotating arm falls off, be sure to tighten before each use and check occasionally while the arm is rotating to ensure the arm is secure. Additionally, prop up the end of the base opposite the motor housing to counteract gravity and keep the arm from unscrewing.
  • If medium is sliding to either end of cup, prop up corresponding end of base to even out pooling.
View Less Details
Description Shipping & Returns From the Manufacturer Reviews
jump
This Spin It Pro tumbler turner spinner is absolutely perfect for creatively personalizing tumblers. Add glittery embellishments to customize your project by placing the cup on the arm and giving it a spin!

Click here for instructions.

Details:
  • White with blue accents
  • 6 tumbler turners
  • Weight limit for Spin It is 13 oz. (368.5 g)
  • Do not use with cups that hold more than 32 fl. oz. (946 mL)
  • Do not use Spin It with objects taller than 8" (20.32 cm)
  • Avoid running for more than 6 hours at a time
  • Simple and easy to use
  • Perfect for personalizing tumblers
  • Read all instructions before use
  • Plastic, metal, and cord
Size Information:
  • 9.4" x 4" (23.8cm x 10.16cm) machine
  • 5.95" x 4.5" (15.11cm x 11.43cm) arm
  • 4.2" x 1.5" (10.6cm x 3.81cm) handle
Tips:
  • Use low speed setting to evenly dry epoxy
  • Use high speed setting to keep runny mediums from dripping
  • It is recommended to place newspaper or a drop cloth under cup to protect tool and work surface
  • After extensive use rotating arm may become loose. Tighten by rotating Ridged Base clockwise.
Cleaning epoxy from your machine:
  • Scrape as much material as you can from the surface using a stiff metal or plastic scraper.
  • Clean the residue with lacquer thinner, acetone, or rubbing alcohol (follow safety warnings on solvents, and provide adequate ventilation).
  • Once epoxy is removed, use a clean, wet cloth to remove any remaining solvents from the surface to avoid damaging, stripping or corroding the machine or arm.
Troubleshooting:
  • If rotating arm falls off, be sure to tighten before each use and check occasionally while the arm is rotating to ensure the arm is secure. Additionally, prop up the end of the base opposite the motor housing to counteract gravity and keep the arm from unscrewing.
  • If medium is sliding to either end of cup, prop up corresponding end of base to even out pooling.
This Spin It Pro tumbler turner spinner is absolutely perfect for creatively personalizing tumblers. Add glittery embellishments to customize your project by placing the cup on the arm and giving it a spin!

Click here for instructions.

Details:
  • White with blue accents
  • 6 tumbler turners
  • Weight limit for Spin It is 13 oz. (368.5 g)
  • Do not use with cups that hold more than 32 fl. oz. (946 mL)
  • Do not use Spin It with objects taller than 8" (20.32 cm)
  • Avoid running for more than 6 hours at a time
  • Simple and easy to use
  • Perfect for personalizing tumblers
  • Read all instructions before use
  • Plastic, metal, and cord
Size Information:
  • 9.4" x 4" (23.8cm x 10.16cm) machine
  • 5.95" x 4.5" (15.11cm x 11.43cm) arm
  • 4.2" x 1.5" (10.6cm x 3.81cm) handle
Tips:
  • Use low speed setting to evenly dry epoxy
  • Use high speed setting to keep runny mediums from dripping
  • It is recommended to place newspaper or a drop cloth under cup to protect tool and work surface
  • After extensive use rotating arm may become loose. Tighten by rotating Ridged Base clockwise.
Cleaning epoxy from your machine:
  • Scrape as much material as you can from the surface using a stiff metal or plastic scraper.
  • Clean the residue with lacquer thinner, acetone, or rubbing alcohol (follow safety warnings on solvents, and provide adequate ventilation).
  • Once epoxy is removed, use a clean, wet cloth to remove any remaining solvents from the surface to avoid damaging, stripping or corroding the machine or arm.
Troubleshooting:
  • If rotating arm falls off, be sure to tighten before each use and check occasionally while the arm is rotating to ensure the arm is secure. Additionally, prop up the end of the base opposite the motor housing to counteract gravity and keep the arm from unscrewing.
  • If medium is sliding to either end of cup, prop up corresponding end of base to even out pooling.
View Less Details
Shipping & Returns
jump

Shipping & Returns

Shipping

Most products may be shipped via standard ground (delivered in 3-5 business days), second day or next day. Orders placed by 11:00 AM Central Time using second day or next day will ship the same day. View Full Shipping Policy and Pricing ›

Returns

If your Michaels.com purchase does not meet your satisfaction, you may return it within two months (60 days) of purchase. To return an item (excluding sample products), the item must be new, unused and in its original packaging. You may return the item to a Michaels store (excluding Michaels Pro Returns) or by mail. View Full Return Policy ›

From the Manufacturer

You May Also Like

jump Customer Reviews
6 Pack: We R Memory Keepers® Spin It™ Pro Tumbler Turner is rated 3.4 out of 5 by 233.
Rated 4 out of 5 by from Turners Which it would turn In Both directions
Date published: 2022-05-10
Rated 1 out of 5 by from Trash Its loud, and the cup grip is already coming off. One of the arm springs popped off already
Date published: 2022-05-08
Rated 1 out of 5 by from Not good for large tumblers Not good for large tumblers… it worked for about 5 minutes then fell off and the tumbler almost got ruined. Now I can’t get the arm to screw back on and spin again. Definitely not worth the money. Better off building your own or getting one on Amazon.
Date published: 2022-05-04
Rated 3 out of 5 by from Needs more atrachments It is not the most universal cup turner . It doesn't work for epoxy pens , or large cups.
Date published: 2022-05-02
Rated 5 out of 5 by from We R tuner This is a wonderful product and works very well
Date published: 2022-05-01
Rated 5 out of 5 by from Procraftinators I have been too scared to try this yet, but I could not pass up the price.
Date published: 2022-04-28
Rated 1 out of 5 by from Motor sucks I had this turned for three months and the motor went out. Would not recommend!
Date published: 2022-04-28
Rated 1 out of 5 by from Just No Had to take this back as it was missing the entire arm piece. I needed something quick and this was not the best idea. Very flimsy compared to others found online. Buyer beware. For the price, definitely NOT WORTH IT.
Date published: 2022-04-19
  • y_2022, m_5, d_15, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasreviews, tv_88, tr_145
  • loc_en_US, sid_MP659413, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_michaels