EnviroTex Lite® Pour-On High Gloss Finish
Item #
M10178984
From:
$15.99
Promotions
EnviroTex Lite® Pour-On High Gloss Finish
From:
$15.99
Promotions
Details
https://www.michaels.com/envirotex-lite-pour-on-high-gloss-finish/M10178984.htmlVariations
-
Size:
Product Actions
Description
Put a high-gloss, waterproof finish on your projects for a striking, lustrous effect. This unique formula is a reactive polymer compound specially designed for pouring onto horizontal surfaces. Heat- and alcohol-resistant, this epoxy coating is ideal for a variety of mediums, including wood, fabric, decals, bisque, photos, paper, metal, models, painted surfaces, dried flowers, plaster, rocks, seashells, bread dough, Styrofoam™ and more. Durable and resilient, this material requires zero polishing to produce a high-gloss look.
Details:
- Available in multiple sizes
- Waterproof
- High gloss finish
- Cures in 8 hours (full strength in 72 hours)
Put a high-gloss, waterproof finish on your projects for a striking, lustrous effect. This unique formula is a reactive polymer compound specially designed for pouring onto horizontal surfaces. Heat- and alcohol-resistant, this epoxy coating is ideal for a variety of mediums, including wood, fabric, decals, bisque, photos, paper, metal, models, painted surfaces, dried flowers, plaster, rocks, seashells, bread dough, Styrofoam™ and more. Durable and resilient, this material requires zero polishing to produce a high-gloss look.
Details:
- Available in multiple sizes
- Waterproof
- High gloss finish
- Cures in 8 hours (full strength in 72 hours)
EnviroTex Lite® Pour-On High Gloss Finish is rated
out of
5 by
123.
Rated 1 out of
5
by
AMT1 from
Do NOT use this for table top or countertop.
I thought this was setting up fine, I mixed it exactly as the directions stated. I poured and left to cure for the full 72 hours before putting anything on it. When a candle holder was placed on it for a few hours it left indentations in the top of the surface. While the instructions state this can happen I apparently didn’t think it would be a big deal, but it’s kinda hard to use a table/counter if you can’t place items on it. My surface was also wavy after the cure. I have purchased a better quality epoxy to fix it and it is looking much better.
Date published: 2020-10-18
Rated 1 out of
5
by
j and b from
horrid resin
I bought the gallon size. The first set I bought, about half way through had white flecks floating in the hardner part. When used these flecks show up in your end product and ruin it. I bought a second set and it had the same problem. I will not buy this again. This is the ONLY brand so far that has had this problem. I complained to the company directly and they didnt seem to care that their product was defective. The cost was $200 total and half of it is unuseable.
Date published: 2020-10-12
Rated 5 out of
5
by
Chris1006 from
Faux marble
Remodeling a small guest bathroom. Completed faux marble floor
Date published: 2020-09-18
Rated 5 out of
5
by
Pendants I make and sell from
Best Resin I have found yet!
I make Pendants out of this Resin. Has a high shine finish. Easy to mix and pour too!
Date published: 2020-08-26
Rated 1 out of
5
by
Anonymous from
Yellow from the start
I purchased this product and took it out of the box. The hardener was yellow. Since I was not familiar with this brand, I decided to mix it and see if the color improves through the chemical reaction. Nope, it started off yellow, and quickly turned amber colored. I hope I can return this to Michael's because I bought it before the Covid shut down and probably don't have the receipt handy.
Date published: 2020-07-12
Rated 2 out of
5
by
Hannah2233 from
Not great coverage
I thought I followed the directions perfectly and watched multiple videos before trying this. I measured out enough varnish Plus an extra oz just Incase i needed more for 2 of my paintings and I must’ve did something wrong bc everytime I spread the varnish on the sides or edges of the paintings it just fell off and didn’t cover the space so they dried with abunch of bald spots and all the varnish dripped off and wasted. I’m unsure what I did wrong but maybe next time I’ll just use a paint brush and do thin layers Instead
Date published: 2020-06-08
Rated 5 out of
5
by
BoredomProjects from
Fun way to revamp a dull space!
I was impressed with the directions and how well the finished product came out. I did a resin pour over my laminate countertop. Not perfect - could have used a bit more resin - but it was my first attempt!
Date published: 2020-05-18
Rated 5 out of
5
by
JackeeS from
Holy Grail
After researching I purchased the Art Resin epoxy resin system, which was pretty expensive at $60 for two 16 oz bottles. I’d wanted to go with the best. I used the system and was tremendously disappointed with my results. Followed the directions as instructed, poured and my touch didn’t absolutely nothing to remove the bubbles. I ended up scorching my molds. I bought the EnviroTex system and received twice as much as I got with Art Resin, cheaper after gc and coupon. Mixing was easy. No exaggeration, I did my pour, I didn’t even need to use my torch!!!!! This system is much better that Art Resin. The finish is definitely high gloss. The only down side is the “curing process” begins after about 20-25 minutes.
Date published: 2020-05-11