Time Required :
Over an hour
Beginner
Beginner
You're new to the skills necessary to complete this project, or maybe you've tried them just once or twice before.
Step 1
Project Note: The Fujifilm Instax Share™ Smartphone Wireless Printer is a great alternative to the camera. You can send photos from your Smartphone to the printer and print onto the Instax™ film.
 
Measure across the top of the frame and mark the center. 
Step 2
Use a craft saw to create a groove on the pencil mark. This groove should be wide enough to fit the binder ring and about ¼" deep. 
Step 3
Trace the frame shape onto the back of a piece of scrapbook paper. 
Step 4
Cut out the scrapbook paper and use a tape runner to adhere it to the front of the wood frame. 
Step 5
Punch 20 butterflies from the Gold scrapbook paper. 
Step 6
Use a tape runner to adhere the butterflies to one side of the frame. After applying the adhesive tape to the back of the butterflies bend some of the wings upward and attach to the frame. Set frame aside. 
Step 7
Measure and cut eight rectangles of chipboard that are 3" x 4½". 
Step 8
Measure and cut eight rectangles of floral scrapbook paper that are 3" x 4½". This will cover one side of each of the chipboard rectangles.  
Step 9
Measure and cut out four rectangles of polka dot scrapbook paper that are 3" x 4½". 
Step 10
Measure and cut out four rectangles of gray and white scrapbook paper that are 3" x 4½".  
Step 11
Use a tape runner to attach the scrapbook paper to the front and back of the chipboard. 
Step 12
Measure and mark ¼" below the center of the short side of the rectangle. Repeat on each rectangle.  
Step 13
Use a Crop-a-dile™ to punch a hole at the site that you marked on each rectangle. 
Step 14
Click here to download the photo template and cut out.  
Step 15
Use the template for placement of four photo corners on each of the rectangles. This will create a placeholder for your photos to fit inside the photo corners.  
 
TIP: If you do not have Instax™ photos, you can print out photos and cut them down to size to fit the rectangles.
Step 16
Slide all of the rectangles onto the binder ring and close the ring around the top of the frame and slide it into the groove. 
Step 17
Place the peg stand into the hole on the back side of the frame.
 
Share your project photos with #MakeItWithMichaels 
Materials

Product Actions

Product Actions

Materials
 

    Products

  • You’ll Need: 1
    Item # 10185364 
    $2.99
    Add to cart options
  • You’ll Need: 1
    Item # 10219013 
    In Store Only 
    $0.79
    Add to cart options
  • You’ll Need: 1
    Item # 10202263 
    $2.59
    Add to cart options
  • You’ll Need: 1
    Item # 10273691 
    $1
    Add to cart options
    *No additional coupons or discounts may be applied.
  • You’ll Need: 1
    Item # 10147423 
    $3.99
    Add to cart options
  • You’ll Need: 1
    Item # 10366747 
    $20
    Add to cart options
  • 809188527
    You’ll Need: 1
    Item # 10220528 
    $1.99
    • Color: Gold
    • Size: 12" x 12"
    • Color: Gold
    • Size: 12" x 12"
    • Color: Gold
    • Size: 12" x 12"
    Add to cart options
 
Tools

Product Actions

Tools
 

    Products

  • You’ll Need: 1
    Item # 10358811 
    $5.99
    Add to cart options
  • You’ll Need: 1
    Item # 10202471 
    $18.99
    Add to cart options
  • 809188603
    You’ll Need: 1
    Item # 10326413 
    $6.99
    $16.99
    clearance
    • Size: 1/4 in
    clearance
    • Size: 1/4 in
    • Size: 1/4 in
    Add to cart options
    *No additional coupons or discounts may be applied. While supplies last. No rain checks.
 

Product Actions

You’ll Also Need
  • 1 - Recollections® Openstock Paper 12""x12"" – Floral Bunches (sku 10317539)
  • 1 - Revell® Razor Saw Set With Fine Blade (sku 10111664)
  • Ruler
  • Scissors
  • Computer
  • Printer
  • Pencil
+ View More