Time Required :
About 30 minutes
Intermediate
Intermediate
You're somewhat experienced with the skills necessary to complete this project, but you haven't mastered all the elements, yet.

kiss the cook decal

There’s not much better than a home-cooked meal, right? Show your personal chef know how much you appreciate them with this shiny ‘Kiss the Cook’ decal that you can stick right on their kitchen wall! It’s easy to make with your Cricut® and this special pattern from Martha Stewart.
Step 1
Project Note: This project will make one wall decal that’s 11½"x10" in size.
 
First, place a sheet of adhesive foil onto the cutting mat. Make sure the side with the grid is facing down.
Step 2
This project’s design is all ready for you in Cricut® Design Space™. To link to it directly, just click here.  
Step 3
Next, follow the prompts in Design Space™ to cut out the words from your adhesive foil.

TIP: Before you start cutting, make sure you have your Cricut® set to cut from ‘Adhesive Foil.’
Step 4
Now, use your weeder tool to remove all the excess vinyl around and inside your letters. When you’re done, only the letters themselves should be left on their backer paper. 
Step 5
Cut a piece of transfer tape that’s a bit bigger than your decal. Peel the sticky tape away from its backer paper. (You can discard the backer paper.) 
Step 6
Place the sticky transfer tape (sticky-side down) on top of the adhesive foil words. Carefully burnish the letters to make sure they’re completely stuck to the tape.

TIP: To burnish, use your scraper (or your fingernail, in a pinch) to rub the vinyl all over, especially along the edges. Make sure you get every letter!
Step 7
At one corner, gently peel away the backer paper, leaving the adhesive foil words attached to the transfer tape. 
Step 8
Now, place the tape onto your wall (or other surface). Make sure it’s centered and straight; then burnish the foil letters once more to make sure they’re completely stuck to your desired surface. 
Step 9
Almost done! All you need to do now is gently peel away the transfer tape.
 
Share your project photos with #MakeItWithMichaels 
Materials

Product Actions

Product Actions

Materials
 
 
Tools

Product Actions

Tools
 
 

Product Actions

You’ll Also Need
  • 1 - Cricut® Explore Air™ 2 Martha Stewart Edition (10556054)
+ View More