
Intermediate
You're somewhat experienced with the skills necessary to complete this project, but you haven't mastered all the elements, yet.
loops & threads® barcelona™ crochet fan cowl in greenery
Step 1 |
Project Note:The number of Skeins needed to complete this project is 1 - Barcelona™ Yarn by Loops & Threads® - Greenery FINISHED MEASUREMENTS: Circumference = 33" and Length to Point = 28" GAUGE: 1 pattern repeat = 3" x 3", blocked; save time and check your gauge SPECIAL STITCHES: PS (puff stitch): (yo, insert hk in indicated st, yo and pull up a lp the same height as working row) 3 times, yo and pull through all 7 lps on hk, ch 1. Fan: (PS, ch 1) 4 times in indicated st or sp. Picot: Ch 3, sl st in 3rd ch from hk. PATTERN NOTES: The ch 1 after each puff stitch in the fan is in addition to the ch 1 used to close the top of each puff stitch. As written this cowl uses close to the entire ball. If your gauge is too loose you may need a second ball. ABBREVIATIONS: Ch = Chain Dc = Double Crochet Hk = Hook Lp(s) = Loop(s) Rep = Repeat(ing) Rnd(s) = Round(s) RS = Right Side Sc = Single Crochet Sk = Skip Sl St = Slip Stitch Sp = Space St(s) = Stitch(es) WS = Wrong Side Yo = Yarn Over |
Step 2 |
INSTRUCTIONS: Increase Section Row 1 (WS): Ch 6, dc in 6th ch from hk, turn – counts as dc, ch 2, dc. Row 2 (RS): Ch 4 (counts as dc, ch 1 throughout), sk 1 dc, [PS, ch 1] twice in each of next 2 ch (counts as Fan), dc in top of beg ch-3, turn. Row 3: Ch 5 (counts as dc, ch 2 throughout), dc in first dc, ch 5, sk Fan, (dc, ch 2, dc) in 3rd ch of beg ch-4, turn. Row 4: Ch 4, work Fan in ch-2 sp, dc over ch-5 sp and into center ch-1 of Fan below, ch 1, work Fan in ch-2 sp of beg ch-5, dc in third ch of beg ch-5, turn – 2 Fans. Row 5: Ch 5, dc in first dc, ch 5, sk Fan, (dc, ch 2, dc) in next dc, ch 5, sk Fan, (dc, ch 2, dc) in 3rd ch of beg ch-4, turn. Row 6: Ch 4, work Fan in ch-2 sp, *dc over ch-5 sp and into center ch-1 of Fan below, ch 1, work Fan in next ch-2 sp; rep from * to last ch-5 sp, dc over ch-5 sp and into center ch-1 of Fan below, ch 1, work Fan in ch-2 sp of beg ch-5, dc in third ch of beg ch-5, turn – 1 Fan increased. Row 7: Ch 5, dc in first dc, *ch 5, sk Fan, (dc, ch 2, dc) in next dc; rep from * to last Fan, ch 5, sk Fan, (dc, ch 2, dc) in 3rd ch of beg ch-4, turn. Rep Rows 6-7, 6 more times, then Repeat Row 6 once more – 10 Fans. |
Step 3 |
Straight Section Row 1 (WS): Ch 4, dc in first dc, * ch 5, sk Fan, (dc, ch 2, dc) in next dc; rep from * to last Fan, ch 5, sk Fan, (dc, ch 1, dc) in 3rd ch of beg ch-4, turn. Row 2 (RS): Ch 4, (PS, ch 1) twice in ch-1 sp, *dc over ch-5 sp and into center ch-1 of Fan below, ch 1, work Fan in next ch-2 sp; rep from * to last ch-5 sp, dc over ch-5 sp and into center ch-1 of Fan below, ch 1, (PS, ch 1) twice in 4th ch of beg ch-4, dc in 3rd ch of beg ch-4, turn – 9 Fans, 2 partial Fans. Row 3: Ch 3, sk 2 PS, *(dc, ch 2, dc) in next dc, ch 5, sk Fan; rep from * to last fan, (dc, ch 2, dc) in next dc, ch 3, sc in 3rd ch of beg ch-4, turn. Row 4: Ch 3, *work Fan in next ch-2 sp, dc over ch-5 sp and into center ch-1 of Fan below, ch 1; rep from * to last ch-2 sp, work Fan in ch-2 sp, ch 1, sc in 1st ch of beg ch-3, turn – 10 Fans. Row 5: Ch 4, dc in first sc, * ch 5, sk Fan, (dc, ch 2, dc) in next dc; rep from * to last Fan, ch 5, sk Fan, (dc, ch 1, dc) in 1st ch of beg ch-3, turn. Rep Rows 2-5, 1 more time, then rep Rows 2-4 once more. Next Row (WS): Ch 4, sc in first sc, *ch 2, sc in center ch-1 of Fan, ch 2, (dc, ch 2, dc) in next dc; rep from * to last Fan, ch 2, sc in center ch-1 of Fan, ch 2, (dc, ch 1, dc) in 1st ch of beg ch-3, turn. Next Row (RS): Ch 1, sc in each st across, do not turn. Next Row (RS): Ch 1, working from left to right, work reverse sc across. Cut yarn, leaving a long tail, and fasten off. Using tail, sew back seam along edge of straight section. |
Step 4 |
Bottom Edging Join yarn at center back with RS facing. Rnd 1: Ch 1, work 3 sc in edge of each row to point, work 3 sc in point (same ch st as first dc is worked into), work 3 sc in edge of each row to center back, sl st in first sc to join – 129 sc. Rnd 2: Ch 1, [sc in next 2 sc, picot, sc in next sc] 21 times, sc in next sc, (sc, picot, ch 5, sl st in 5th ch from hk, picot, sc) in next sc, sc in next sc, [sc in next 2 sc, picot, sc in next sc] 21 times, sl st in first sc to join -130 sc. Fasten off. Finishing: Weave in ends. Lightly block to measurements. Share your project photos with #MakeItWithMichaels |
Supplies
Materials
Materials
https://www.michaels.com/loops-and-threads-barcelona-crochet-fan-cowl-in-greenery/B_84454.html
Tools
Tools
https://www.michaels.com/barcelona-yarn-by-loops-and-threads/10524753.html
You’ll Also Need
Instructions
Step 1 |
Project Note:The number of Skeins needed to complete this project is 1 - Barcelona™ Yarn by Loops & Threads® - Greenery FINISHED MEASUREMENTS: Circumference = 33" and Length to Point = 28" GAUGE: 1 pattern repeat = 3" x 3", blocked; save time and check your gauge SPECIAL STITCHES: PS (puff stitch): (yo, insert hk in indicated st, yo and pull up a lp the same height as working row) 3 times, yo and pull through all 7 lps on hk, ch 1. Fan: (PS, ch 1) 4 times in indicated st or sp. Picot: Ch 3, sl st in 3rd ch from hk. PATTERN NOTES: The ch 1 after each puff stitch in the fan is in addition to the ch 1 used to close the top of each puff stitch. As written this cowl uses close to the entire ball. If your gauge is too loose you may need a second ball. ABBREVIATIONS: Ch = Chain Dc = Double Crochet Hk = Hook Lp(s) = Loop(s) Rep = Repeat(ing) Rnd(s) = Round(s) RS = Right Side Sc = Single Crochet Sk = Skip Sl St = Slip Stitch Sp = Space St(s) = Stitch(es) WS = Wrong Side Yo = Yarn Over |
Step 2 |
INSTRUCTIONS: Increase Section Row 1 (WS): Ch 6, dc in 6th ch from hk, turn – counts as dc, ch 2, dc. Row 2 (RS): Ch 4 (counts as dc, ch 1 throughout), sk 1 dc, [PS, ch 1] twice in each of next 2 ch (counts as Fan), dc in top of beg ch-3, turn. Row 3: Ch 5 (counts as dc, ch 2 throughout), dc in first dc, ch 5, sk Fan, (dc, ch 2, dc) in 3rd ch of beg ch-4, turn. Row 4: Ch 4, work Fan in ch-2 sp, dc over ch-5 sp and into center ch-1 of Fan below, ch 1, work Fan in ch-2 sp of beg ch-5, dc in third ch of beg ch-5, turn – 2 Fans. Row 5: Ch 5, dc in first dc, ch 5, sk Fan, (dc, ch 2, dc) in next dc, ch 5, sk Fan, (dc, ch 2, dc) in 3rd ch of beg ch-4, turn. Row 6: Ch 4, work Fan in ch-2 sp, *dc over ch-5 sp and into center ch-1 of Fan below, ch 1, work Fan in next ch-2 sp; rep from * to last ch-5 sp, dc over ch-5 sp and into center ch-1 of Fan below, ch 1, work Fan in ch-2 sp of beg ch-5, dc in third ch of beg ch-5, turn – 1 Fan increased. Row 7: Ch 5, dc in first dc, *ch 5, sk Fan, (dc, ch 2, dc) in next dc; rep from * to last Fan, ch 5, sk Fan, (dc, ch 2, dc) in 3rd ch of beg ch-4, turn. Rep Rows 6-7, 6 more times, then Repeat Row 6 once more – 10 Fans. |
Step 3 |
Straight Section Row 1 (WS): Ch 4, dc in first dc, * ch 5, sk Fan, (dc, ch 2, dc) in next dc; rep from * to last Fan, ch 5, sk Fan, (dc, ch 1, dc) in 3rd ch of beg ch-4, turn. Row 2 (RS): Ch 4, (PS, ch 1) twice in ch-1 sp, *dc over ch-5 sp and into center ch-1 of Fan below, ch 1, work Fan in next ch-2 sp; rep from * to last ch-5 sp, dc over ch-5 sp and into center ch-1 of Fan below, ch 1, (PS, ch 1) twice in 4th ch of beg ch-4, dc in 3rd ch of beg ch-4, turn – 9 Fans, 2 partial Fans. Row 3: Ch 3, sk 2 PS, *(dc, ch 2, dc) in next dc, ch 5, sk Fan; rep from * to last fan, (dc, ch 2, dc) in next dc, ch 3, sc in 3rd ch of beg ch-4, turn. Row 4: Ch 3, *work Fan in next ch-2 sp, dc over ch-5 sp and into center ch-1 of Fan below, ch 1; rep from * to last ch-2 sp, work Fan in ch-2 sp, ch 1, sc in 1st ch of beg ch-3, turn – 10 Fans. Row 5: Ch 4, dc in first sc, * ch 5, sk Fan, (dc, ch 2, dc) in next dc; rep from * to last Fan, ch 5, sk Fan, (dc, ch 1, dc) in 1st ch of beg ch-3, turn. Rep Rows 2-5, 1 more time, then rep Rows 2-4 once more. Next Row (WS): Ch 4, sc in first sc, *ch 2, sc in center ch-1 of Fan, ch 2, (dc, ch 2, dc) in next dc; rep from * to last Fan, ch 2, sc in center ch-1 of Fan, ch 2, (dc, ch 1, dc) in 1st ch of beg ch-3, turn. Next Row (RS): Ch 1, sc in each st across, do not turn. Next Row (RS): Ch 1, working from left to right, work reverse sc across. Cut yarn, leaving a long tail, and fasten off. Using tail, sew back seam along edge of straight section. |
Step 4 |
Bottom Edging Join yarn at center back with RS facing. Rnd 1: Ch 1, work 3 sc in edge of each row to point, work 3 sc in point (same ch st as first dc is worked into), work 3 sc in edge of each row to center back, sl st in first sc to join – 129 sc. Rnd 2: Ch 1, [sc in next 2 sc, picot, sc in next sc] 21 times, sc in next sc, (sc, picot, ch 5, sl st in 5th ch from hk, picot, sc) in next sc, sc in next sc, [sc in next 2 sc, picot, sc in next sc] 21 times, sl st in first sc to join -130 sc. Fasten off. Finishing: Weave in ends. Lightly block to measurements. Share your project photos with #MakeItWithMichaels |