Time Required :
About 30 minutes
Beginner
Beginner
You're new to the skills necessary to complete this project, or maybe you've tried them just once or twice before.

multi-strand druzy necklace

Step 1
Remove about 1½" from both sides of the chain on the rainbow druzy bar necklace.  
Step 2
Remove the clasp, extender and jump ring from the dainty chain. Set aside. 
Step 3
Open the jump ring at the clasp end of the rainbow druzy bar necklace and add one end of the dainty chain. Open the jump ring at the extender chain end of the rainbow druzy bar necklace and add the other end of the dainty chain. 
Step 4
Cut the dainty chain in half at the center point of the chain. 
Step 5
Cut 5" of stringing wire. String 25 metallic seed beads into wire. Slide a crimp bead to one end of the wire. Slide the wire through the last link on one end of the cut dainty chain, and thread it back through the crimp bead. Slide it through several seed beads and tighten the crimp bead between the last seed bead and the last chain link. Crimp bead with pliers. 
Step 6
Repeat Step 5 on the other side. Trim excess stringing wire. Tuck wire end inside the seed beads. 
Step 7
Attach one end of the beaded chain to the jump ring at the clasp end of the rainbow druxy bar necklace and repeat on the opposite end of the beaded chain to the extender end of the dainty chain. 
Step 8
Cut the seventh link that hangs below the string of seed beads on the left side of the beaded chain. Add the clasp that was removed from the dainty chain in Step 2 to the short side of the beaded chain. 
Step 9
On the long side of the beaded chain, remove the last link that was cut in Step 8. Remove the eye pin from the bead.
 
TIP: If you would like to make matching earrings, remove two additional links.  
Step 10
Thread the black bead onto a head pin and make a simple loop on top of the bead. Trim excess wire.
 
TIP: Form a simple wire loop by grasping the head pin wire between the jaws of a pair of round nose pliers. Rotate the pliers toward you, keeping a firm grip on the wire until a small loop is formed. 
Step 11
Thread an eye pin through the crystal drop and make a loop. Trim excess wire.
 
NOTE: There should now be a loop at the top and bottom of the crystal drop. The bottom is the wider part of the crystal drop and the top is the narrow part.
Step 12
Attach the black bead to the bottom of the crystal drop by opening the bottom loop slightly and sliding on the loop of the black bead. Close the slightly opened loop. 
Step 13
To make the seed bead link, thread three seed beads onto an eye pin and make a loop. Trim excess wire. 
Step 14
Attach the seed bead link to the top loop of the crystal drop the same way the black bead was added to the bottom. 
Step 15
Attach the opposite end of the seed bead link to the end of the long side of the beaded chain. 
Step 16
Attach the clasp on the shorter side to the same level link on the longer side.   
Step 17
Project Note: Click here for materials and instructions to create the matching Earrings featured in the image. 
  
Share your project photos with #MakeItWithMichaels  
Materials

Product Actions

Product Actions

Materials
 

    Products

  • 809188141
    You’ll Need: 1
    Item # 10474858 
    $2.99
    • Color: Bronze
    • Size: 4 mm
    • Color: Bronze
    • Size: 4 mm
    • Color: Bronze
    • Size: 4 mm
    Add to cart options
  • 809188162
    You’ll Need: 1
    Item # 10442999 
    $2.99
    • Color: Silver
    • Size: Medium
    • Count: 80
    • Color: Silver
    • Size: Medium
    • Count: 80
    • Color: Silver
    • Size: Medium
    • Count: 80
    Add to cart options
  • 809188166
    You’ll Need: 1
    Item # 10151200 
    $4.29
    • Color: Silver
    • Size: 100
    • Count: 100
    • Color: Silver
    • Size: 100
    • Count: 100
    • Color: Silver
    • Size: 100
    • Count: 100
    Add to cart options
  • Add to cart options
 
Tools

Product Actions

Tools
 

    Products

  • Add to cart options
  • Add to cart options
  • Add to cart options
  • You’ll Need: 1
    Item # 10321920 
    $2.99
    $5.99
    Add to cart options
  • You’ll Need: 1
    Item # 10315203 
    In Store Only 
    $9.99
    Add to cart options
 

Product Actions

You’ll Also Need
  • Ruler
+ View More