Dritz Double-Cap Rivets are used to secure multiple layers of a material together and as a decorative accent on handmade projects and accessories. The Double-Cap provides a finished appearance on the front and back side of your project. Used to secure multiple layers of fabric, vinyl, leather, canvas, belting and other materials together. Great to use as a no-sew options for projects where it is hard to reach into tight areas or hard to stitch through thick layers with a sewing machine.

Details:

Silver
8mm x 6mm
120 sets and 3 tools
Double-cap feature provides the same finished appearance on both sides of project
For proper fit once cap is applied, there should be at least 2 mm of post showing on the back side before attaching cap to post of rivet
Hand tools included for application
Larger quantity for use with multiple projects packaged in reusable zipper storage bag
Nickel

Instructions:
Test a rivet on scrap of material being used to check that application will be suitable for intended use.
1. Mark position of rivet on top and bottom side of material layers.
2. Working on a very firm, protected work surface, position tip of hole punch on marked position and hammer with rubber mallet. Continue hammering until hole is punched through all layers. Note: Use an awl for materials that are difficult to cut with hole punch tool. Hole should only be large enough for the rivet post to pass through.
3. Insert post of rivet into hole from right to wrong side of fabric.
4. Place cap over rivet post and snap into place. Cap will be loose.
5. Position rivet on concave side of anvil; place concave end of setting tool over cap. 6. Holding setting tool straight and firmly at the base, gently hammer the two caps together.

Dritz® Silver Double-Cap Rivets & Tools, 120 Sets

Dritz® Silver Double-Cap Rivets & Tools, 120 Sets