- Measure up from the bottom about 3" and make a small mark with the black Sharpie® marker. Measure and mark all the way around the tub about every 3"-4".

- Apply painter's tape around the tub, lining the up top of the tape on the markings.

- From the top of the tape, measure up 2½" and make a small mark. Continue to measure and mark all the way around the tub about every 3"-4".

- Apply tape around the tub, lining up the bottom of the tape on the markings. Press the tape down on the edges to keep paint from seeping under.

- Paint Water Lily outdoor paint between the taped areas to create a wide white band. Let dry and apply one more coat. Let dry.

- Paint Flamingo Pink outdoor paint over the painted wide band. Let dry and apply additional coats as desired. Let dry.

- Paint the wood plaque with Water Lily outdoor paint. Let dry.

- Cut the flip-flop stencil between the two flip-flops and position them to fit onto the plaque. Spray the back of the stencils lightly with stencil adhesive and press into place.

- Use a small stencil brush, dip it into Flamingo Pink outdoor paint, then pounce it onto a piece of scrap paper to remove some of the paint. Pounce paint onto the stencil. If you wish to do the alternating color stripes, pounce one color carefully onto every other opening. Let dry, then apply Harbor View outdoor paint in the same manner and let it dry.

- Pounce Coral outdoor paint onto the flip-flop's straps. Remove stencil and let dry.

- Touch up any areas, using a small paintbrush.

- Adhere the plaque to the front of the tub, using hot glue.

Share your project photos with #MadeWithMichaels

Galvanized Flip Flop Bucket

Instructions

ADDITIONAL MATERIALS