First, click here for the design in Cricut® Design Space™.
TIP: Hide (or delete) the translated version you do not need.

#@#

Size the design as you would like it to appear on your pouch.

#@#

Click ‘Make It’ in the upper right corner of your screen.

#@#

In your preview screen, check ‘Mirror’ in the left panel for each mat layer to reverse your image.

#@#

Now, click ‘Continue’ in the bottom right corner of your screen and choose the correct material.

#@#

Place the iron-on material for the first layer, shiny-side down, onto your cutting mat. Load the mat into your Cricut® machine, then press the blinking Cricut® icon to start cutting.

#@#

Repeat Step 6 with remaining layers.
TIP: When cutting with multiple material types, such as matte, glitter and/or foil, be sure to watch the preview panel so update the material type so your machine knows how to cut each layer.

#@#

Use scissors to cut the design from each iron-on material roll. Next, use your weeder tool to remove all the excess material around and inside your design. You’ll be left with just the reversed design on the clear plastic carrier sheets, which are slightly sticky.

#@#

Preheat your EasyPress™ to the appropriate temperature for your material and, if needed, adjust the timer.
TIP: See the Quick Reference Guide, included with your EasyPress™, for temperature and times or click here for an interactive guide. You can also use an iron to press your material. Just follow the instructions included in the iron-on material packaging.

#@#

Place your pouch on top of your EasyPress™ mat and then preheat the fabric for 5 seconds.

#@#

Place the carrier sheet, so it’s sticky-side down, onto your pouch. You should be able to see the layer through the carrier sheet, just as it will appear once ironed.
TIP: Press each layer, one at a time, starting with the bottom layer.

#@#

Place your EasyPress™ on top of the design, apply the appropriate pressure for your material and press the time button. Once it beeps, flip over your pouch and press for another 15 seconds. If your material is the warm peel type, you may go ahead and peel off the carrier sheet. If your material is a cool peel type, let it cool completely before removing the carrier sheet.

Share your project photos with #MakeItWithMichaels

#Momlife Purse Pouch

Instructions

ADDITIONAL MATERIALS