Time Required :
Over an hour
Beginner
Beginner
You're new to the skills necessary to complete this project, or maybe you've tried them just once or twice before.

sedona wind chime

Add some elegance to your porch or patio with this crystal wall hanging.
Step 1
Hanger and Stick
 
Step 1
Find a natural stick and cut down to 8", using a wire cutter.

Step 2
Measure and cut a piece of chain 20" long to create the hanger.

Step 3
Measure and cut a piece of chain 6.5" long for the hanger dangle.

Step 4
Use a jump ring to attach the dangle to the center of the 20" piece of chain for the hanger.

Step 5
Use a jump ring to attach a small crystal pendant to the end of the dangle.

Step 6
Attach the two ends of the hanger to the ends of the sticks, about half an inch from the ends. Loop chain around the stick and tightly attach to itself using a jump ring. 
Step 2
Strand 1
The first strand requires a 2.5" and a 3.5" length of chain, one large turquoise pendant, one small white crystal pendant and four small jump rings.
 
Step 1
Loop the 2.5" chain around the top of the stick and attach to itself with a jump ring.

Step 2
Attach the large pendant to the end of that piece of chain with a jump ring.

Step 3
Attach the 3.5" chain to a jump ring and keep the ring open.

Step 4
Hook that jump ring to the ring attached to the large pendant so that the chain hangs behind it. Close jump ring.

Step 5
Attach the small crystal pendant to the end of the bottom chain using a jump ring. 
Step 3
Strand 2
The second strand requires a 3" and a 4.5" length of chain, one large white pendant, one small crystal pendant, and four small jump rings.

Step 1
Loop the 3" piece of chain around the top of the stick and attach to itself using a jump ring.

Step 2
Attach the large pendant with a jump ring at the end of that chain.

Step 3
Attach a jump ring to the top of the 4.5" strand of chain and leave jump ring open.

Step 4
Hook jump ring onto the other jump ring that attached the pendant so that the chain is hanging behind it. Close ring.

Step 5
Use a jump ring to attach the small crystal at the end of the chain. 
Step 4
Strand 3
The middle strand requires one 4.5" and one 2.5" length of chain and six lengths approximately 2" long, one small white crystal, one large Mint pendant, and one turquoise arrowhead pendant and seven jump rings.

Step 1
To create the tassel measure and cut six pieces of chain each 2" long. Slide all six pieces of chain onto one jump ring and close the jump ring.

Step 2
Loop the 4.5" strand of chain around the stick and secure to itself tightly using a jump ring.

Step 3
Attach the small crystal to that chain half an inch from the stick using a jump ring.

Step 4
Use a jump ring to attach the large pendant to the end of that chain.

Step 5
Add a jump ring to the top of the 2.5" piece of chain and leave the ring open.

Step 6
Slide the tassel onto the open jump ring with the 2.5" chain so that the chain and the tassel are hanging behind the large pendant and close ring.

Step 7
Attach the arrowhead pendant to the end of the chain using a jump ring. 
Step 5
Strand 4
Repeat instructions from Strand 2. 
Step 6
Strand 5
Repeat instructions from Strand 1. 
 
Tip: How to open a jump ring:

Step 1
To open a jump ring, use two chain-nose pliers, grasping each side with a pair of pliers.

Step 2
Instead of pulling the sides apart, twist the ring in opposite directions to prevent distorting the shape of the ring.

Step 3
Close in the same manner, twisting the ring so the ends meet. 
Step 7
Share your project photos with #MadeWithMichaels 
Materials

Product Actions

Product Actions

Materials
 

    Products

  • You’ll Need: 1
    Item # 10443093 
    $2.99
    Add to cart options
 
Tools

Product Actions

Tools
 

    Products

  • You’ll Need: 1
    Item # 10315203 
    In Store Only 
    $9.99
    Add to cart options
  • Add to cart options
  • Add to cart options
  • You’ll Need: 1
    Item # 10466662 
    $7.99
    Add to cart options
  • You’ll Need: 1
    Item # 10466666 
    $7.99
    Add to cart options
  • You’ll Need: 1
    Item # 10466667 
    $7.99
    Add to cart options
  • You’ll Need: 1
    Item # 10466712 
    $7.99
    Add to cart options
 

Product Actions

You’ll Also Need
  • 1 - Bead Landing™ Thin Elongated Cable Chain, Gold (sku 10468995)
  • Wire Cutters
  • Stick
  • Ruler
+ View More