Beginner
You're new to the skills necessary to complete this project, or maybe you've tried them just once or twice before.
Step 1 |
Use washi tape to create design onto mirrors. Click here for the Star of David design. Cut ends of washi tape for a clean straight edge. Allow washi to slightly hang over edge of mirror to allow for easier removal. Tip: When applying washi tape to mirrors, smooth tape down with fingers to secure adequate adhesion. This will prevent spray from seaping under tape during the spray process. In a well-ventilated area, lay mirrors down onto cardboard (or newspaper) and spray two even layers of Frosted Glass spray. Allow paint to dry for several minutes between layers. Set mirrors aside to dry for 15 minutes. TIP: For best results, hold can at least 8"-10" away from mirror surface while spraying and spray in a side-to-side motion. Apply one even coat of Krylon® Clear Sealer to mirrors. Set mirrors aside to dry 15 minutes. Carefully remove washi tape from mirrors. Share your project photos with #MakeItWithMichaels |
Supplies
Materials
Materials
https://www.michaels.com/star-of-david-frosted-mirror-coasters/B_82423.html
https://www.michaels.com/krylon-make-it-last-clear-sealer/10170246.html
You’ll Also Need
- Scissors
- Newspaper (or Cardboard)
Instructions
Step 1 |
Use washi tape to create design onto mirrors. Click here for the Star of David design. Cut ends of washi tape for a clean straight edge. Allow washi to slightly hang over edge of mirror to allow for easier removal. Tip: When applying washi tape to mirrors, smooth tape down with fingers to secure adequate adhesion. This will prevent spray from seaping under tape during the spray process. In a well-ventilated area, lay mirrors down onto cardboard (or newspaper) and spray two even layers of Frosted Glass spray. Allow paint to dry for several minutes between layers. Set mirrors aside to dry for 15 minutes. TIP: For best results, hold can at least 8"-10" away from mirror surface while spraying and spray in a side-to-side motion. Apply one even coat of Krylon® Clear Sealer to mirrors. Set mirrors aside to dry 15 minutes. Carefully remove washi tape from mirrors. Share your project photos with #MakeItWithMichaels |