Canada - English
Krylon® UV-Resistant Clear Matte
Item # 10429012
$8.99
Krylon® UV-Resistant Clear Matte
$8.99
Details
https://www.michaels.com/krylon-uv-resistant-clear-matte/10429012.htmlProduct Actions
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Description
Give your craft projects and artwork a permanent, protective and longer lasting clear finish that protects surfaces from damaging UV light rays. Permanent finish guards against fading and is just right for anything made of paper maché, ceramic, plaster, glass, metal, wood, plastic or dried silk flowers.
Details:
- 11 oz. (311 g)
- Non-yellowing
- Moisture resistant
- Matte finish
- Dries to touch in 10 minutes
- Dries fully in 5 hours
WARNING: Extremely Flammable.
Give your craft projects and artwork a permanent, protective and longer lasting clear finish that protects surfaces from damaging UV light rays. Permanent finish guards against fading and is just right for anything made of paper maché, ceramic, plaster, glass, metal, wood, plastic or dried silk flowers.
Details:
- 11 oz. (311 g)
- Non-yellowing
- Moisture resistant
- Matte finish
- Dries to touch in 10 minutes
- Dries fully in 5 hours
WARNING: Extremely Flammable.
Krylon® UV-Resistant Clear Matte is rated
out of
5 by
28.
Rated 5 out of
5
by
Jeremey from
Holds up on baseball bats
I turned a bat on a lathe for my son using hard maple stock. I used Krylon primer, paints and UV-Resistant Clear to protect it. To really bring out the shine, I applied several layers, and wet sanded using various grits, starting at 400 grit and finishing with 5000 grit. After I sanded the bat, I buffed it out with buffing compound and polished it. The bat came out absolutely awesome; so awesome that I've had two of his teammates order bats from me. So far, with the help of Krylon products, those bats are coming out just as awesome.
My only complaint it that the paint on my son's bat is chipping. Its a bat, it gets abused, thrown in dirt sometimes with maybe a pebble or small rock, and dropped in the dugout as well, on the concrete or asphalt. Chipping is pretty well expected. However, besides the chips and expected ball scuffs, the paint and clear is withstanding the abuse far better than I expected, and the bat still looks phenomenal.
To be honest, I feel like most of those having issues in here are not reading the can before use. Yeah, it's spray paint, pretty straight forward, shake the can and spray. But I've found if you don't shake the can enough, problems occur. I've also found that when using it, if I instantly go to the project and spray, it causes issues. To mitigate this, I spray a piece of scrap wood for 3 to 5 seconds, then go to the project. I've also found that using it when it is too cold, problems occur. To mitigate this, I keep the paint and project in the temperature regulated house. Regardless of the temperature outside, I take it outside and spray it, then return it indoors immediately. It's kind of a pain to do things this way, but it has worked so far. Humidity is a real concern too. I called Krylon to find out using in less than 70% humidity is recommended, but less than 60% is best. Recoating at the wrong times has caused issues. To alleviate that issue, I either recoat within 1 hour of the previous coat, or I wait more than 48 hours to recoat. If I wait more 48 hours, I wet sand with 400 or 600 grit prior to recoat. And spraying it on too thick has caused issues. You can't rush the paint if time is not on your side. Multiple thin layers will provide a far better result that glopping it on in thick layers, and the amount of time you save by not doing re-work will be well worth the time it takes to do it right the first time. Believe me, I'm very impatient and have had to completely remove the finish from a bat a couple times already. Now, I'm waiting against my own will.
Date published: 2018-11-06
Rated 1 out of
5
by
KitJones99 from
Made a cloudy film on my art
This was recommended to me for use on dark stained wood with writing in white chalk pen and it made a light cloudy film all over - looks awful. I don’t know what to do cause the art was a hand made wedding present so I can’t really ask for a new one. Ugh
Date published: 2018-10-17
Rated 1 out of
5
by
Rutherford from
DESTROYS ACRYLIC PAINTINGS
DO NOT USE THIS ON PAINTINGS!!! I've been fairly dissatisfied in the past, as it creates a dust that ruins colors and cannot be cleaned, but just now a two-week, $600 commission was COMPLETELY IRREPARABLY DESTROYED by this! Thanks, Krylon!
Date published: 2018-09-05
Rated 5 out of
5
by
Robert7 from
Printable DVD's and CD's
As you may already know with my 5 star rating I am happy. I'm an armature videographer and family historian. I try to keep all in the family circle up to as date as possible with Christmas/Easter/4th of July/Graduations etc. pictures and videos. My DVD's should be used for a few years I think so preservation is important, electronic storage is convenient but not likely to go generation to generation without a transfer vehicle like dvd, vhs static pictures etc.
A few years ago I did a funeral for my best friends mother at his request. I was humbled by his confidence in my ability. He called me on his way home from the interment and asked me why I didn't use waterproof printing. I was shocked and embarrassed that I had overlooked that aspect of my label printing after switching from paper labels to direct disc inkjet printing. I never asked why he found that out either I cold only imagine bad things.
I didn't forget that lesson, this product does exactly what I want, it renders the DVD or CD in a professional finish that is water resistant, highlights colors and does nothing but make you look good.
On DVD and CD discs it dries literally in seconds to the touch
WARNING!! Do NOT USE IN HI HUMIDITY!! In doors in air conditioning no problem even when raining outside. My first use was in a garage when it was raining and I trashed my first 4 discs. they turned white due to the humidity. It says so right on the can. I read that AFTER the learning experience. Once dry on your project (discs) no problem-o.
BTY, one can will do more than 80 discs 2 coats I'm pretty sure. I think I've done about that and still on my first can
Best regards to all you project people
Robert - Orlando FL
Date published: 2018-03-15
Rated 3 out of
5
by
Jerseygirl16 from
Doesn't work on brass
I returned this to the store unused after I called the company and found out it cannot be used on brass, it won't adhere to it. I should have done my research first. Krypton is a very good product in general.
Date published: 2017-10-31
Rated 5 out of
5
by
Finleythefelinemodel from
Great sealer
Made coasters using photos and then applied sealer. The sealer dried very quickly. Took a few coats to seal front and back of coasters. Odor of sealer only lasted a few days afterwards.
Date published: 2017-10-22
Rated 2 out of
5
by
Baby2017 from
Smells won't go away
I spray a ceramic that the kids made and the smell is so strong .left it outside for 24 hrs and it still smells strong .What do u do?
Date published: 2017-10-10
Rated 1 out of
5
by
iamdouglas from
terrible
This stuff is awful. I would not suggest this to anyone. It never completely dries and leaves a tacky surface. I have researched a little after the fact and found that others have the same problem. Too bad I didn't find this out before I ruined hundreds of dollars of my artwork....
Date published: 2017-08-01